Community: Message List

Re: DT25 Volume drop

support@line6.com — Wed, 23 Jan 2013 12:28:44 GMT

How old was your one?

DT25 Volume drop

support@line6.com — Wed, 23 Jan 2013 11:10:12 GMT

Hi All,

I was playing at rehersal last night and all was going well. Then out of the blue, the volume of my amp dropped slightly. Not massively, but enough to notice. I'm running my guitar into a POD HD500 via L6 link into the DT25.

At first I thought i'd caught the volume pedal, but this wasn't the case.

Any help is appreciated, and more info can be given if needed!

Re: POD HD500 & DT25 question (another one!)

support@line6.com — Thu, 11 Oct 2012 19:19:49 GMT

Distortion on the amp is amp setting 4, pentode, A/B settings.

I've tried the trick of making the amp set the POD disortion - but everytime I come back to the amp simply sounds better.

Re: POD HD500 & DT25 question (another one!)

support@line6.com — Thu, 11 Oct 2012 18:37:02 GMT

Spot on greghall you hero!

Thanks too David

POD HD500 & DT25 question (another one!)

support@line6.com — Thu, 11 Oct 2012 15:46:48 GMT

Hi All,

Hopefully this is in the right area!

I love the distortion that comes from the DT25 - the distortion that comes from the pod is far too digital.

However, when I set my amp channels to do a high gain sound, it messes with some patches on the pod (for example "otherness" is a total mess).

So! I want to know if it's possible to have channel A or B on the amp my dedicated distortion channel, and have the other purely for the Pod. Essentially, switching between them from the pod.

Bit of a POD HD500 noob!

Spider Valve Mk.1 XLR issue

support@line6.com — Thu, 26 May 2011 19:11:45 GMT

Evening all!

Ok, so i'm running my guitar into a Line 6 Gearbox GX, which goes straight into my mac. Recording onto reaper is no problem here (albeit the tone's a bit digital).

Anyway, I recently got a Spider Valve (mk.1 212) for cheap, and noticed it had a "balanced direct out" which is awesome, as now I can record with the amp tone. Connected the guitar to the amp, the amp (via XLR) to the gearbox, and gearbox to mac.

It all works, and the tone is sweet with one problem - the signal is too quiet! I have to compress and boost the signal to record it at audible level - but then the tone is gone!

Checked the guitar, amp, gearbox, mac and all leads and I can't find any fault separately - so the question is:

Why is the signal so quiet? Your help is greatly appreciated!