Community: Message List

Re: Joost Vergoossen patches

support@line6.com — Fri, 08 Feb 2013 11:34:05 GMT

I use JBX guitar and sometimes Ibanez Spider Black guitar and i use SONY headphones in PODHD500. Sometimes i use TASCAM US-1641 Audio/MIDI interface with Behringer PA speakers. On stage i use either Line6 spider 4 (15 watts) transistor amp or Marshall Class 5 tube amp (5 watts). Thanks for the response. I also use sometimes Behringer Xenyx 1204 mixer with EMI near 5" monitors.

Re: Joost Vergoossen patches

support@line6.com — Sun, 03 Feb 2013 15:16:09 GMT

I have now downloaded and transfered the choosen Joost Vergoossen Presets to my Line6 PODHD500. But i don´t think they sound as good as on the Joost Vergoossen demonstration on Youtube, so i wonder if anyone can come up with a hint how i should tweak the parameters (amp, volume, effects and so on) so that the presets sounds as good as on the demonstration on Youtube?

Re: Tuner in PODHD500

support@line6.com — Sun, 03 Feb 2013 14:23:24 GMT

I should do that, but a easyer way is to look at the key that stands in the window below.

Joost Vergoossen Presets to PODHD500

support@line6.com — Sun, 03 Feb 2013 14:20:13 GMT

I wonder where i can find Joost Vergoossen Presets (clean, cruch and lead) to PODHD500 on www.line6.com? He is a Line6 demonstrator.

Tuner in PODHD500

support@line6.com — Sat, 26 Jan 2013 06:41:17 GMT

I really can´t use the tuner in PODHD500 properly, i detroyed the tunerscrew on my guitar almost because of it. I look at the dot or line between the two lines at right and left where the line should be if the guitar is in tune, but even if i did that i tuned wrong. Is it somebody out there who can describe and tell me how i should use the tuner correct?

POD HD500

support@line6.com — Mon, 03 Sep 2012 08:14:52 GMT

I think POD HD500 have amazing presets and the presets sounds (even) better if i play them on stage with a tube amplifier or transistor amplifier then when i practice with headphones in my apartment. But like most effect processors POD HD500 doesn´t sounds that good when i plug the processor directly into a PA system or a audio/MIDI interface. Or is it some one who have different experience of that?

Re: MIDI control Axon Guitar synth with Line6 POD HD500

support@line6.com — Thu, 23 Feb 2012 05:09:06 GMT

Thanks for all your answers.

Re: MIDI control Axon Guitar synth with Line6 POD HD500

support@line6.com — Wed, 22 Feb 2012 15:48:25 GMT

I don´t think it is something wrong with my MIDI cables or the configuration on my AXON but i don´t know if i should use CC numbers or Program change when i set the MIDI configuration on POD HD500. And it stands in the manual that i have to use FS5-FS8 mode and not ABCD mode in the system setup to control via MIDI and then i can´t switch presets. I have tried to for example set MIDI channel number 1 and program change and value number 45 on footswitch 5 in the MIDI configuration for 12A "Yngwie Tone" to get presets number 45 "Alto sax" on Axon.

MIDI control Axon Guitar synth with Line6 POD HD500

support@line6.com — Wed, 22 Feb 2012 10:09:18 GMT

I have difficulties to set Line6 POD HD500 to change presets on a guitar synth called Axon ax 100 MKll. If i for example have presets 12A on POD HD500 and simultionsly want to have preset 45 "alto sax" on Axon how do i do it? I have tried to set the right MIDI channel and the right footswitch and so on.

Re: Have the same volume on different presets

support@line6.com — Sat, 26 Nov 2011 08:32:27 GMT

Thanks for the answer, then i adjust the presets by ear.