Community: Message List

Re: Possible to connect G50 antennas to G90?

support@line6.com — Sun, 14 Oct 2012 10:30:36 GMT

Thanks!!

Possible to connect G50 antennas to G90?

support@line6.com — Sat, 13 Oct 2012 03:11:34 GMT

I own a G90 which I use for my electric guitar (of course). But this same guitar has a dedicated piëzo output. A few songs I'm playing with this piëzo and connect a cable (with Neutrik Silent jack) to the dedicated output. But I want a wireless solution so I was planning to buy me another G90. Recently I've been offered a second hand G50 so I'm wondering if it is possible to connect the Antenna Outputs on the G90 to the Antenna "inputs" on the G50 so the G90 is the antenna distributor. If this is possible it would save me some serious cash!!

Re: Best (non-guitar) amplifier for HD500?

support@line6.com — Tue, 12 Jun 2012 13:41:15 GMT

Same here. Using my HD Pro straight to F.O.H. and to my in-ears. With rehearsel I'm using a cheap *** Behringer B212D (yup, mono!). It's very loud, has massive low end, even with the bass control rolled down. With some palm muting I'm blowing away our bassplayer. Bought the Behry second hand, in mint condition for only € 100,-.

Re: Possible to control a parameter with one of the footswitches on the HD500?

support@line6.com — Sat, 19 May 2012 14:07:23 GMT

And this is it!! Traded my trusty GT-8 for a as good as new FBV Shortboard mk II.

Re: Cat5-cable between POD HD Pro and FBV Shortboard mkII

support@line6.com — Fri, 18 May 2012 17:45:10 GMT

No one answered so I've done some hands-on research:

Only four wires are used, in T568B scheme these colours are being used: green, brown, blue and white/blue.

Re: Possible to control a parameter with one of the footswitches on the HD500?

support@line6.com — Sat, 12 May 2012 09:20:02 GMT

Now 1,5 years further, I've ordered a POD HD Pro and traded my GT-8 to a second hand but mint FBV Shortboard mk II. So yes, it's gonna happen. Next week UPS will make me a happy man!!

Cat5-cable between POD HD Pro and FBV Shortboard mkII

support@line6.com — Sat, 12 May 2012 09:09:54 GMT

I was wondering if all eight wires of the Cat5-cable are used. Is this the case? If not, which wires are really being used?

Re: Possible to control a parameter with one of the footswitches on the HD500?

support@line6.com — Tue, 19 Oct 2010 12:40:23 GMT

Just back after more than two hours of testing. Brought my trusty Ultimate Ears UE11pro in-ears for the ultimate sonic experience. But........ didn't like the amp-models at all. Yes, it's a fact that the HD is more dynamic than all previous POD's but the ampmodels just not seem to apeal to me. The clean tones are really great but there's only one Rectifier model and that's the one I don't use with my own Rectifier...... Sorry

Re: Possible to control a parameter with one of the footswitches on the HD500?

support@line6.com — Tue, 19 Oct 2010 09:47:13 GMT

Nick (and others),

Thanks for your replies. No thanks, I don't want to use an external effect. I guess it's gonna be something like this: with one footswitch turn on/off delay, with another footswitch turn on/off i.e. EQ for volume boost. I can work with that, in fact I'm doing the same thing with my full tube rig, but it would be nice to have it the same way as with my GT-8.

Re: Possible to control a parameter with one of the footswitches on the HD500?

support@line6.com — Tue, 19 Oct 2010 08:49:02 GMT

Okay, seems like it's not possible to switch an FX on/off and control a parameter at the same time. Thanks!!

But it is possible with the Exp. pedal........ I don't like two Exp. pedals so maybe I could connect a DPDT footswitch to the Exp.2-input and control what I want. Hmmmm, but than again, is it possible to turn on/ off FX with the Exp.pedal?? Either way, I'm going to try the HD500 this afternoon. Thanks again!!