Community: Message List

Re: Unsure??? 2 speaker cables for hd 150?

support@line6.com — Sat, 31 Mar 2012 14:52:26 GMT

I think I saw 2 (TWO) speaker cabs in his question. So if that is not what he really wants, I do and have searched around for the right speakers/cabs as in two (2) 4x12 cabs. Would the line 6 412VS-T and 412VS-B work with line 6 Spider IV HD150 head??? I'm guessing any TWO (2) 4x12 cabs, each rated at 8ohms would work???

Re: 4ohm vs 8 ohm lowdown

support@line6.com — Fri, 18 Mar 2011 13:15:52 GMT

It appears as the HD750 head has been disconntinued. Every on-line store I visited states its no long available. Is Line 6 coming out with a new model ? Will Line 6 come out with other cab configurations ? i.e. 6x10, 8x10, 1x15, 2x12, 1x15 and 4x10 together ?

Re: RE: LD410

support@line6.com — Wed, 16 Mar 2011 13:44:42 GMT

THANKS !

Re: RE: LD410

support@line6.com — Thu, 10 Mar 2011 02:15:51 GMT

A LD400 Pro combo does have a Speakon connection on the back to extend to a cab.

Re: LD410

support@line6.com — Thu, 10 Mar 2011 02:15:20 GMT

A LD400 Pro combo does have a Speakon connection on the back to extend to a cab.

LD410

support@line6.com — Fri, 04 Mar 2011 22:24:32 GMT

Hello All,

I have searched all over Line6 web site for info on the LD410. There is very little for a manuel and not much on the forum.

If I take 2 LD410 what is the ohms and wattage ? I know 1 LD410 is 8 ohms @ 600 watts.

WHat is 1 LD410 is connected to a LD400 Pro ?

Re: Set up for Pod Studio UX2

support@line6.com — Thu, 17 Feb 2011 20:55:58 GMT

Thanks,

I used the Monkey to get PodFarm 2, so all is fine. Gearbox freezes up all the time and not usable.

I've uninstalled and re-installed Gearbox a millions times. I'll just stick with Pod Studio to produces some different sounds.

Why is there so little LOVE for bassist ??? I've noticed a million pre made sounds for guitarist but very little for bassist, unless you buy the bass extension pack at $100. DAMN, I have 2 Line 6 Combos (LD 300 Pro / 400 Pro), a 410 cab, FBV MKII Shortboard, Pod Studio UX2 and now I have to pay $100 for about 30 amps/effects when guitarist have tons to choose from. Line 6, hook me up !! I've dropped some dime with you guys and would like some equal amount of pre set tones.

Thanks !

Re: Set up for Pod Studio UX2

support@line6.com — Tue, 15 Feb 2011 14:12:02 GMT

After loading the Pod Farm 2, everything works fine.Why wouldnt Pod Farm 2 be include with a new purchase (02.14.11)?

Set up for Pod Studio UX2

support@line6.com — Mon, 14 Feb 2011 20:40:44 GMT

I have a new Pod Studio UX2 I would like to connect to a MacBook Pro laptop. The Mac is OSX and about 3 months old, so it has the hardware to run this. I've installed the POD Farm software, the RiffWorks software. Everytime I connect the UX2 to my laptop a grey screen comes up telling me to shut down my puter and restart it. I do that and the same thing happens of boot up. Whats wrong ? How do I get this to work with my laptop, LD400, FX shortboard ect ect.

Re: your amp settings?

support@line6.com — Thu, 25 Nov 2010 03:07:52 GMT

A custom rock that I made up, dont remember the true settings as its saved in my FBV MkII Shortboard. There are several others built into the FBV that are great.

Gear:

Line6 LD 400 Pro - connected to Line6 LD 300 Pro and both controlled by Line6 FBV MkII Shortboard

Ibanez SRA500

Ibanez SR700

Ibanez SR705
Ibanez Effects Pedal

Boss Tuner Pedal, doubling as a A/B box

Moster Cables