Community: Message List

Re: POD HD500 vs M13

support@line6.com — Sun, 07 Oct 2012 18:41:36 GMT

Hey Phil,

Thnx a lot!

For me the reason to make the switch is turning two pedals into 1.

And because effects between M13 and the XT Live differ a lot. So no use for me to fondle away at home with al kinds of effects only to come to the conclusion i can't use them on the m13. (or they differ to much).

I've watched some instructional videos. In one I noticed that in the HD500 you will still have to select an output mode. In my opinion things went wrong with the XT live at that point. (sound drop)

In that case the M13 indeed is the better in usability.

I also wonder how the HD500 works with MIDI. I use the m13 now to switch channels on my amp. Is the HD500 similar in use in midi controlling? (or maybe even better).

One thing the m13 lacks is interscene spillover. Is the HD500 capable of that?

Thnx again!

POD HD500 vs M13

support@line6.com — Sun, 07 Oct 2012 17:04:44 GMT

Hello there,

I currently own 2 multi pedals from Line 6.

The POD XT Live and the M13.

I'm considering buying the HD 500 to replace both.

At home i play on the XT Live. The HD500 will replace that one easily. The M13 I use in bandprac and live.

The latter is what I'm most curious about. I once connected my pod XT live to my amp (front) but that sounded quite terrible. There was significant tone loss.

That's why I chose the M13. No more amp or cab modulation in between. Just effects.

So, Is the HD500 the ultimate mix of both pedals I use now? And would it be a better replacement of my M13 which I'm currently using, without (and I stress without) ANY difference in sound.

Very curious indeed!

Grtz

Matti

Re: Best metal amp modeled from Line 6

support@line6.com — Mon, 12 Mar 2012 19:04:05 GMT

Cheers!

Re: Best metal amp modeled from Line 6

support@line6.com — Mon, 12 Mar 2012 18:41:30 GMT

Any chance of sharing the Pod xt Live metal tones?

Re: MIDI on M13 -> switch channels on amp

support@line6.com — Tue, 15 Nov 2011 17:41:05 GMT

Hey Rowbi.

Thanks a lot for your answer.

I took a look at it with our singer and we came to the following conclusion:

In latch mode you'll have to set everything up. For example:

on A1 I set up a delay effect and I want my amp on the distortion channel.

on A2 I set up a reverb and I want my amp on the clean channel.

So I can change these predefined settings...so A1 will always have the delay + Distortion.

I can' t change channels individually with the M13.

If this assumption is right I actually would have 12 different scenes. Each combined with 1 channel on my amp.

Can I repeat this trick for the different banks?

MIDI on M13 -> switch channels on amp

support@line6.com — Thu, 10 Nov 2011 20:57:45 GMT

Hi there,

I have a m13 pedal.

With that pedal i want to control the channels on my amp.

Is this only possible in latch mode?

How do i set it up? How do i MIDI learn the M13 so that it does what i want. (combine effects op m13 with channels on my amp)

I use 3 channels on my amp (H&K Tube 100 with MIDI module).

-Clean

-Light distortion

-Heavy distortion.

Does this have any effect on 4cable method? I do not use that at the moment by the way..

Re: M13 designers - What's next?

support@line6.com — Thu, 10 Nov 2011 20:52:30 GMT

What a waste that no one from Line6 bothers to join in this fruitfull conversation.....

Re: M13 -> H&K MSM-1 MIDI Module

support@line6.com — Wed, 09 Nov 2011 21:08:46 GMT

Anyone?

M13 -> H&K MSM-1 MIDI Module

support@line6.com — Mon, 19 Sep 2011 12:37:20 GMT

Hey there,

I recently purchased the MSM-1 Module for my H&K Amp.

I want to use this module to connect my M13 to my amp.

Is this possible? Where can i find a clear description of how to set up my M13 with my MIDI module (Amp)

And which mode do i have to use (momentary? Latch?)

Advice please! :-D

Re: Toneport KB37 record

support@line6.com — Fri, 15 Apr 2011 08:28:39 GMT

Thank a lot!

I will try this next weekend during band rehearsal.