Community: Message List

Re: Phantom power not working at all

support@line6.com — Fri, 07 Dec 2012 03:59:17 GMT

Got my 3rd soundscape (after 2 returns) and so far everything is working fine.

Re: Make faders on iPad linear...!!

support@line6.com — Fri, 07 Dec 2012 01:28:26 GMT

I agree with rudarl make the knobs linear.

Re: But...where is real 0 db??? too low rec level

support@line6.com — Mon, 03 Dec 2012 02:45:25 GMT

I had the same problem of seemingly low recordings. Are you saying we should keep the master record level at around 0 anyway to avoid cliping. I was turning the master all the way up to compensate. Are you saying that will cause distortion.

Re: Phantom power not working at all

support@line6.com — Tue, 20 Nov 2012 03:22:07 GMT

Looks like your right about the hardware problem reset the machine back to original setting and still have the same problem. Starting to wonder about quality contol on these units. This is the second defective unit I've had. Each unit had different defects. But the concept of SS is so good it's hard to go back to the alternative so I guess I'm on to my third.

Re: Phantom power not working at all

support@line6.com — Tue, 20 Nov 2012 01:58:15 GMT

It worked before with the same mic and cord so all of a sudden something went wrong. Did the hardware all of a sudden fail. I'll check the cord but I doubt that's it cause it did work before.

Phantom power not working at all

support@line6.com — Mon, 19 Nov 2012 22:30:43 GMT

Turned on stagescape today and tried to hook a condensor mic to channel no. 1 and got no sound. Only hiss buzzing type sound. Found by using another mic and cord that it was the phantom powering. It was not working on either set of the phantom power buttons. I know there was a problem with the second phantom powering but now its both. We need a firmware update soon.

Re: iPad-App - Please optimize the functionality of the rotary knobs

support@line6.com — Tue, 06 Nov 2012 23:47:59 GMT

I agree both options are not ideal. Something should be done to fine tune.

Re: Stagescape startup Problems, blank Screen

support@line6.com — Wed, 31 Oct 2012 20:10:31 GMT

I had one of those that had that problem. I think it will be fixed in the update but just to make sure I exchanged mine at guitar center where I bought it

Re: Power On Problem

support@line6.com — Thu, 11 Oct 2012 13:11:47 GMT

I would say that is definately not normal and I would return it and get a new one. It could get worse. Looks like some units may have a problem in this area.

Re: Using The Auto Trim Feature

support@line6.com — Sat, 06 Oct 2012 22:49:02 GMT

Thank you that makes perfect sense.