Community: Message List

Re: Monkey creates fatal error

support@line6.com — Thu, 08 Nov 2012 11:47:15 GMT

OK,

Problem solved:

Looked on forums, and the only things which causes this kind of errors are malfunctioning pci boards (put not right in), damaged cables, loosened connections, or: wrong audio drivers!

Since I used a newer computer now, I had also moved the STaudio soundcards to the new one. Now, by looking closer at install, seems that I used the wrong soundcard drivers. I updated them, and all works fine again.

Now Monkey and Line6 edit do not create a fatal error, since the audio card is midi wise working correct again.

So faith in Line6 is restored again, moreover because it wasn't Line6's fault.

Happy again,

Greetz, Rig

Re: Monkey creates fatal error

support@line6.com — Thu, 08 Nov 2012 11:15:28 GMT

Guys, thanx for reply..

I know that Line6 edit = VettaII, worked fine, only now on Core I3 PC, when Line6 Edit tries to use midi detection,it gives this fatal error.

I also use HD500, with it's own editor, which works also fine! Only when trying to run Monkey, this prog also tries to use midi detection, and then the system collapts.

I already tried to move the USB arouond, even tried with all USB not connected, and it fails at the same stage, during midi detection.

Maybe the soundcard's midi function fails?

If anyone has the same problems, let me knwo...

Monkey creates fatal error

support@line6.com — Wed, 07 Nov 2012 19:18:31 GMT

Help!

I got a newer computer to do the line6 things: Pod HD500 is updated and works fine with last updates and editor.(which I did on a Pentium4)

Now al is installed on a Core I3 duo (XP Professional), editor and HD500 works fine, only monkey, (latest version)when I start it up, and it comes to midi detection I get a BSOD with message:

*** Hardware malfunction

NMI parity check / Memory partity error

System has halted

So I rebooted for 20 times now trying things like:

Putting the pci (STaudio) soundboard firmly in place,
changing connection cables to the souncard (multipin, maybe a loose connection?)
changing the midi config to the general Windows midi,
Trying to get my VettaII talking in midi, but when i want to add the Vetta in Line6 edit (It can't find it anymore, normally it was there automatically), the same error as above occurs..
remember that HD500 still is not connected, but I tried it also with it connected on several different USB ports
Reinstall Monkey latest version
Reinstalling Monkey very old version, and trying to get it updated (which it does, only when it comes to midi detection, the BSOD happens again)

I'm losing my long lasting faith now, has anyone got a clue?

Greetz, Rig Kikken.

Re: RE: Vetta v2 Crackles and generates noise bursts

support@line6.com — Thu, 24 Mar 2011 14:26:40 GMT

Thanks for your answer, but..

Since I have some 30 presets in my vetta, resetting all would be the last option. Could the powerstage be suffering from components wich are degrading?

Vetta v2 Crackles and generates noise bursts

support@line6.com — Fri, 18 Mar 2011 08:22:55 GMT

Hi There,

Until now, nothing but thumbs up for my vetta. I played it for two years now (with 1 or 2 4*12 old line6 cabs). I've had a problem with the rotating knobs (on the drive pod), and after putting them in zero position this seems also be solved. But now, at given times, it begins loud crackling and gives a type of ''white noise bursts" suddenly, and 5 seconds later it is quiet again. First I thought of bad cables, for this is what it sounds like, but they are OK.

Also it seems to me (since I use In Ear monitoring now) , this comes only out of the cabs, and is not heard by me on the in ears. Seems that the power stage has a problem . Has anyone dealt with this/experience the same problem? If yes, wat is the solution?

Thanks for looking into my question, greetings from Holland!

Using stomp box control button on double amp setup

support@line6.com — Tue, 09 Mar 2010 10:18:53 GMT

Hi There,

I want to use a stomp box (distortion or whatever) on both amps in a double setup. So when i press the distortion, it would be nice if it worked on both amps at the same time. Is this possible? (looks very stupid on stage when you are tapdancing before doing a solo, and have to press distortion ''on" , on the two channels...)

Greetz, Rig