Community: Message List

Re: Does Line6 hate the lounge?

support@line6.com — Sun, 05 Feb 2012 14:45:04 GMT

Being a bbs owner myself, I suspect that Line 6 is having problems with bots and spam.

It takes a great deal of time to manage forums and when it gets filled with crap from bots, spiders and spammers, it ruins it for the rest of us.

My suggestion: Bookmark the page.

Re: My HD150 head just caught on fire. :/

support@line6.com — Sun, 05 Feb 2012 14:41:47 GMT

My guess is the dude is seriously into LOUDNESS! lol

I can relate, I just can't enjoy it that loud where I live and in most clubs, they couldn't take that much volume.

I remember playing a club with no stage and we set up on a concrete floor. I had to turn off all the mics to my drums and go easy on the snare.

Drums have no volume control and even with dampeners it is still loud.

I play guitar now and can enjoy it without pissing off the neighbors.

@rcc2 Rock ON!

Re: FBV Shortboard

support@line6.com — Thu, 29 Dec 2011 15:17:14 GMT

Yeah, got that one figured out on the spider edit program...still not the most savvy on the lingo and all but i got your point. Just was hoping I didn't have to go through all that.

Thank you for your input and feedback.

You Rock!

Re: FBV Shortboard

support@line6.com — Wed, 28 Dec 2011 13:31:21 GMT

Thanks for the effort of hanging in there with me.

It sounds like you understand my issue and it also sounds like the answer is that I cannot change the behavior

of bank selection to be independant of the channels.

ie: if channel A is set to bank 16, B, C and D will all be in their respective banks equivalent of 16 and I cannot set each channel to a different bank without the other channels changing as well.

Re: FBV Shortboard

support@line6.com — Sat, 24 Dec 2011 23:17:35 GMT

I noticed one thing that may help shed some light on the issue and I think I can now ask a more intelligent question to find a solution.

I noticed that all the custom settings I put on A, B, & C are all on bank 16, while D is on bank 7

Selecting D changes A, B, & C to the presets in their relatives in bank 7.

Same happens when I do the same on the other channels.

If I switch any channel to a different bank #, the other channels follow that bank but with their

presets relative in that bank number. ie; Channel A bank-1a selected makes channel B bank-1b, C bank-1c and D bank-1d.

Here is the question: How do I make each channel independant of the other in terms of bank changes not affecting the other channels?

I know I can go into the FBV Control program and change the order, but that is a temporary solution until I need a preset that is not 'in line' with the other banks (a, b, c, d) contents.

ie; I want to have A on bank 16a, B on bank 2b, C on bank 16c and D on bank 7d.

FBV Shortboard issue...

support@line6.com — Sat, 24 Dec 2011 13:57:06 GMT

I am having an issue with my new set up and instead of reposting it all again, I will post the link I started in the user discussion section.

http://http://line6.com/support/message/340270#340270

The discussion so far details the problem as best I can explain it.

I appreciate any help you can provide to stop this from happening.

Re: FBV Shortboard

support@line6.com — Fri, 23 Dec 2011 13:26:45 GMT

You got it.

I will post a video this weekend.

btw, haven't sent this issue to line6 directly yet. that is next.

I figure it may help anyone else who has this problem to have it posted here as well for any results.

Re: FBV Shortboard

support@line6.com — Wed, 21 Dec 2011 23:59:28 GMT

I am just discovering this as the unit and amp are new.

The response to your other question:

"do your custome settings always change back to the same thing?

how are you saving them in the pedal?"

I can go back and re-select the settings and they will stay selectable as long as I don't press "d" that I have 'positioned' (for lack of a better word) to activate when I am playing.

ie: I have each bank set up so when I need to call up a preset or custom tone, I load it on each so that as the song indicates, I can just press the appropriate a,b,c or d.

I just don't understand why they get changed when I press d just because I have it set to a preset called "fingerlickngood". at that point a b & c are no longer set where I had them and I have to 'bank up or down" to get back to them.

I have made the custom tones in the amps controls. The fbv shows me the same thing as the display on the amp.

I don't create them or save them in the pedal. I don't think that is possible, at least not by reading the FBV shortboard's manual.

Sucks that they comingle it with pod and other stuff, it gets confusing.

Re: FBV Shortboard

support@line6.com — Mon, 19 Dec 2011 22:31:44 GMT

btw,

yesterday, I was setting up a new tone for A in bank 2.

Now, when I select that one, the others change from what I set up previously as well.

I am at a loss here.

Anyone....??? getting a bit disappointed by the line 6 staff's lack of response here.

This whole set up is brand new out of the box, bought September this year as my bday present.

Re: FBV Shortboard

support@line6.com — Sat, 17 Dec 2011 14:37:13 GMT

Yes, I can select them any time.

Problem is, I am setting them up in the order I need them, but selecting "d" and the specific preset causes the A,B,C switches to lose the order I put them in.

I can go back and reset them to the order I had, but it is just frustrating that selecting this one particular preset affects the others.