Community: Message List

HD500 + DT25 + L2t via L6-Link / L2t speakermodes are not stored !!!

support@line6.com — Thu, 18 Apr 2013 13:35:00 GMT

I use a hd500 + 2x DT25 + 1x Stagesource L2t All devices have the lastest firmware. When I use the hd500 alone with the L2t, the hd500 via L6-Link stores the Smart Speaker mode and can recall it. But when I use the hd500 + DT25(chan1) + DT25(chan2) + L2t(chan3)(last in L6 chain), then it's not possible to store or recall a speaker mode. Can you check it, if this is a bug ? Sound via L6-Link is ok !!!

Here is the response from L6-suport:

Hey Stefan,

After thoroughly testing a POD HD500 with (2) DT50 2x12's and a L3t speaker, the behavior you are experience is normal and intended.

When connecting the POD HD500 directly to the StageSource speaker, you can save speakers modes to accommodate the many different types of input sources you could use with a POD HD500, maybe a vocal or acoustic guitar in which case you would want the speaker on 'reference. Another example, might be someone who plugs in a bass or keyboard into the POD HD500, might want to use the 'keyboard' speaker mode.

However when you incorporate the DT series in the L6 Link chain, the POD HD senses that you are playing electric guitar and turns the StageSource speaker into a second guitar amp for you, enabling you to create dual tones with dedicated sets of speakers for each. When you send the L6 link signal from the DT to the StageSource, the StageSource is receiving a 'preamp only' type of signal that sounds terrible on any other speaker mode other then 'electric guitar'. So for this reason, the StagesSource will always default to 'electric guitar' when sensing and receiving L6 Link input from a DT.

-Don

Customer Support

Line 6

Hello Don

Thank you for the quick response.

There are two remarks from my side.

First my L2t switches always to PA mode and not to Electric guitar.

Second i want to use the L2t with my acoustic guitar and therefore i mute my two DT25's and then i want to use the L2M alone in the acoustic mode.

I think this is the common reason for using the DT together with the L2t.

Finally i think it's a limitation, which should be fixed in a future firmware update.

Do you agree with me?

Thanks

Hey Stefan,

I agree with you that this doesn't act as we would expect it to. I escalated these findings to our test lab, who is current investigating this issue. Thanks again for bringing it to our attention.

For now you will have to manually switch the speaker mode in between songs, as the POD HD won't automatically switch the speaker mode.

My hopes is that this can be corrected in a upcoming firmware update. Please hang tight and stayed tuned for updates.

-Don

Customer Support

Line 6

Re: L2m - Does the analog Mix Out Connector include the L6-Link input signal ?

support@line6.com — Wed, 27 Mar 2013 19:23:53 GMT

Thank you for the information. You have answered my question !!!

L2m - Does the analog Mix Out Connector include the L6-Link input signal ?

support@line6.com — Wed, 27 Mar 2013 10:10:31 GMT

Hello

I'm interested in a L2M and I want to know, if Mix Out connector of the box also includes the L6-Link input signal.

That means: I have a stagescape mixer and the L2m box is controlled via the L6-Link interface.

I want to use a second analog box with the same signal. Is it possible to use the Mix-Out connector of the L2M ?

Thanks for help

First firmware (bugfix) update - When ?

support@line6.com — Sun, 20 Jan 2013 10:21:26 GMT

Is there an estimated release date for the first firmware update for the M20d ?

Thanks for some info !

Is it possible to transfer the live mixing output (sdcard recording) digitally via usb ?

support@line6.com — Sun, 02 Dec 2012 19:06:03 GMT

My question:

We recorded some songs (18 tracks) on the sdcard.

After this we remix the channels in the M20d. That means we adjust the level and eq and so on of each track.

We can playback the recorded and remixed tracks via the headphone or the main-outs.

Is it possible to export these live mix digitally to the usb port ?

Is there a different solution ?

Thanks for help

Samsung WIS12ABGNX WiFi USB adapter is compatible to SS

support@line6.com — Wed, 21 Nov 2012 06:42:14 GMT

Hello
For all SS user, who want to use a WiFi-USB-adapter with the Ipad.

The Samsung WIS12ABGNX WiFi USB adapter is also compatible to the Line6 StageScape.

The WIS12ABGNX is actual available in the stores.

We switched to the Airport-Express and therefore we sell our Samsung WIS12ABGNX in Ebay.

If you are interested. Ebay: 140889991132

Re: Wish list for future firmware releases

support@line6.com — Wed, 14 Nov 2012 14:45:26 GMT

sdcard 2GB recording limit

Please introduce spanning (recording is continued with a second wav file) or use two mono wav files for the Main-L+R recording instead of one stereo file.
This would double recording time, before stopping due to 2GB limit.

behaviour and feel of controller knobs at the ipad app

When the controller knob is touched by the finger tip, then a bigger linear fader should be displayed on the ipad.

Here you can make accurate changes and no big controller jumps as it is now.

Displaying the numeric value of the controller setting would make it possible to compare the settings before and after the modification.

Re: iPad app for M20d StageScape reconnects everytime after using another app

support@line6.com — Thu, 15 Nov 2012 06:25:10 GMT

Hello savaf

ok, but this is a very expensive solution to use a second iPad to get rid of the problem

Re: sdcard recording stops when wav file exceeds 2GB - firmware solution ???

support@line6.com — Wed, 14 Nov 2012 14:16:49 GMT

Thank you dboomer for your advice.

But what's about spanning the wav files ?

That means if the limits of 2GB is reached for a recording file, the recordings is continued with a new second wav file and so on.

With sdcard recording camcorders it is the state of the art to use spanning, when the video file is getting bigger than the FAT32 file limits during recording.

If it's not possible to realize spanning in a future firmware update ,please use 2 mono files for the LR-Output and not a stereo file.

This would give us double recording time.

Thanks

Re: strange noise using chorus

support@line6.com — Tue, 06 Nov 2012 18:36:36 GMT

I have the same problem with the chorus.

In my opinion the chorus fx is not usable.

Workaround: I use the Doubler fx for chorus. Please try out the parameters with a short dely time and a light detune.