Community: Message List

Re: Switches not working/Software update not going through

support@line6.com — Tue, 05 Jun 2012 12:27:53 GMT

This is the case:

http://www.youtube.com/watch?v=U2W4819pLM4&feature=related

From time 1:00 to time 2:10 r3fx show exactly how the original switch looks and works compared to a heavy duty momentary switch! I`ve got the same problem with an 2nd handed M9 just bought, so this one is going to get a switch upgrade. Got two brand new M5`s as well on my main pedal board working perfect, but as soon as they start to trouble with me, the has to transform with a switch upgrade!!!

Hope this help you others with M5/ M9/ M13 switch problems out there!!!

Best Regards

Re: HD PRO + 4 Expression Pedals?!

support@line6.com — Fri, 06 Jan 2012 10:36:52 GMT

@spikey

So you write; if the ability is there in the box you might try out the opportunities available to get to another level what consern about guitar fx units and usability for such gear!!!

There are so many cool things to do with the option of 4 expression pedals. I hope Line6 listen to us and make thant happen, as they will garanteed sell more Pro models (pod pro/ xt pro/ x3 pro) than ever!!! The HD Pro might become the industry standard when it comes to guitar fx units for all that I know.

SignaturePre

Re: Pod HD Pro Sys Exe ID ?

support@line6.com — Fri, 30 Dec 2011 19:34:52 GMT

Thanks to Line6 for the Firmware 1.4 that solves the question about CC# for Midi controlling!

Re: HD PRO + 4 Expression Pedals?!

support@line6.com — Fri, 30 Dec 2011 19:32:27 GMT

Hi phil_m

I used to have an Axe-fx Ultra with 4 expression pedals in my rig. I replaced the Ultra with the HD Pro because I missed the Ecoplex and Dynamic Delay (TC2290) from older Line6 products that I`ve owed in the past. This is how I used those 4 expression pedals with the Ultra:

1)Pan L/R

2)Volume pedal

3)Changing feedback for the delay

4)Changing the mix of reverb (10% to 60%)

I`m only using the HD Pro as an fx unit as I run a pair of Egnater heads + 6 stomp boxes hooked up with a RG-16. Guess I need to go back to Fractal and pick up the Axe-fx II..........

Why not use some Line6 energy to give the oportunities to the people out there for less money than the Fractal company?

Best Regards

HD PRO + 4 Expression Pedals?!

support@line6.com — Thu, 29 Dec 2011 19:41:47 GMT

Hi Every Pod HD Users!

The only thing stoping me from calling the POD HD PRO a Fractal killer is if it is possible to run up to 4 Expression pedals as I`m using a Liquid Foot Pro that is offering conection of 4 independent expression pedals.

Anyone who know if Line6 is working on such add to the Firmware 1.4?

Best Regards

SignaturePre

Pod HD Pro Sys Exe ID ?

support@line6.com — Fri, 21 Oct 2011 12:21:08 GMT

Anyone out there familiar with what the Sys Exe ID is for the Pod HD Pro?

I`m trying to hook up my 3 days old HD Pro via MIDI with a Liquid Foot Controller Pro running Firmware 2.16 that have no product to match with in the menu for Direct Control (normaly the LF Pro will sugest to match with Line6 products, but as this option is not able direct I need a Sys Exe ID to confirm what product to match with)

Best Regards

Norway

Re: Pod HD Pro + USB + HD Pro Edit problems

support@line6.com — Thu, 20 Oct 2011 23:49:35 GMT

All drivers where installed. Everything worked just fine yesterday.

I became so frustrated that I borowed my wife s laptop, installed everything there too and it woorked just fine. (Os W7 home)

So I went back to my working horse of a laptop on steroides to uninstall everything for the 2nd time. The Laptop went into safetymode when booting back up again, guess this has to to with a small optional update earlier tonight combined with the uninstalling of the Line6 Software.

When the laptop finaly booted back up and every function was fine after a quick run trough I pluged the USB cable from the HD Pro into a random USB port on my laptop. It found the USB device in no time. I then started the Edit, and happily I saw the "in progress %" text :-) Just spend 5 hours on solving an easy issue.........huuuumf.

Hope the issue was just a once in a lifetime experience as I just sold my Axe-Fx Ultra to get me the new HD Pro for an easier programing methode to get good sounds.

Guess this is my 15th Line6 product as it all started with the Pod Pro back in the year 1999/2000/1 for about 10-12 years ago. The HD Pro though is somthing the other Line6 gear I owend in the past is not even close to compare with. Remember the Vetta Combo with the large footcontroller + a Rectifier 2x12" cab. Man it pushed the limit in every aspect. It died on me when my dealer was trying to upgrade the software..........

The HD Pro is suppose to suffer only as Tremolo, Chorus, Delay and Reverb for my rig as I`m playing my Andersen Signature Preamp build by Krampe Amps in Germany + a pair of Egnater Rebel 30 heads + some Xotic and MXR pedals with a touch of Dunlop Custom Shop Rack Wah.

Best Regards

Norway

Pod HD Pro + USB + HD Pro Edit problems

support@line6.com — Thu, 20 Oct 2011 22:06:21 GMT

Anyone out there with an idea of why the HD Edit does not find the HD Pro when connected?

I`m running W7 Pro 64Bit.

I`m about to start tweaking, and hook it up as the main gear of my rig + Liquid Foot Pro + RJM RG-16 + my own 3 Channel signature tube rack preamp + a pair of Egnater Rebel 30 heads.

The Pod HD Pro Arrived two days ago, everything worked fine yesterday, but there is no responce when trying to connect the HD Pro inside the Line6 Monkey manualy eighter.

(Is there any problems when it comes to use Chrome insted og iE9?)

Best Regards

Norway

Re: USB problems

support@line6.com — Thu, 20 Oct 2011 20:13:10 GMT

Had my HD PRO up and running last night with the HD PRO Edit, but now the Edit is not able to find the HD PRO. Tried to re-instal the Edit, but still the same probleme. I phurchased it two days ago from my local autorized dealer!

Help I want to set up my big rig with HD PRO, Liquid Foot Pro, RJM RG-16, 5 pedals, a custom made 3 channel tube preamp + 2 Egnater Rebel 30 Heads. No I`m not close to complete the rig build as I`m not able to communicate with the HD PRO from the HD PRO EDIT.....

Please help

Best Regards

Norway