Community: Message List

Lowdown 400 HD and the correct power cabinets.

support@line6.com — Fri, 07 Sep 2012 14:56:37 GMT

Hello,

I have a lowdown 400 HD. I am looking to change to light weight cabs. Am I correct that as long as I am running 2 x 8ohm cabs the amplifier will put out no more than 400W RMS so I could use 2 x 200W cabs and not blow them? The cabs I have in mind are actually TC electronics at 250W each so there would be a little head room.

Re: Knackered Pod

support@line6.com — Thu, 29 Oct 2009 10:07:12 GMT

Hello,

Thank you for your advise but I did also try this but it still reported an error.

The next day I when onto a different computer and managed to update it using the none monkey method. I know these is a warning about USB ports at the start of the information but I checked the pod would control the software and the software could control the pod before I attempted the update but even though this checked out I can only guess this USB communication issue was what was behind my problem.

I am pleased to report that I now have a None Knackered Pod.

Cheers any way

Stephen

Knackered Pod

support@line6.com — Sun, 25 Oct 2009 15:27:46 GMT

Hello,

I have a pocket pod, a whole 5 days out of the box. I thought I would try the flash upgrade but part way through the pod started flashing error. I left it alone for a bit. Tried again, still the same also the computer is saying error 80009000. I then tried the monkey and this also won't work. So now I have a pod which just says FlashUpdate 1.00 where the USB lead is plugged in or the Guitar lead. Any ideas?