Community: Message List

FX TO MONITOR DOES NOT UNLINK WITH MAIN FOH LEVEL

support@line6.com — Wed, 06 Feb 2013 12:41:24 GMT

It seems that FX SEND TO MONITOR IS AFFECTED BY THE MAIN output LEVEL.

THE unlink button For THE FX in Monitor Mode doesn't seem to work.

RECIPIE:

Ch1(vocal) with FX A to main output, then ch 1 send to monitor A-

In Monitor mode FX A SEND TO MONITOR A UNLINKED.

PROBLEM: FX A(reverb) in Monitor A goes up in level as I turn main level up ( ch1)

Fx level in monitor should stay THE same if unlinked.

Any Fix?

Saving quick capture Recording

support@line6.com — Mon, 04 Feb 2013 21:12:15 GMT

I am not retrieving quick capture Recording although I Save it in set up and scene.

Can quick capture be' saved or not?

SS WITH ONE SPEAKER ONLY

support@line6.com — Wed, 30 Jan 2013 22:04:35 GMT

Is it possibile to connect L6 LINK OUT TO A STANDARD ACTIVE SPEAKER ? ( ex RCA speaker).;

This way i could get L& R OUT TO ONE SPEAKER .

At present I'connecting one speaker to L main out and it seems that I get only left out and not mono out....

Also chorus FX C. doesn' seem to work well with L main out......

I also undestand I wan't be' able to access G EQ but I would get a full mono signal if connection Is possibile

SS default start up settings

support@line6.com — Sun, 27 Jan 2013 21:59:29 GMT

I'D LIKE TO KNOW IF SS DEFAULTS TO LAST SET UP ON START UP, AND IF I NEED TO RELOAD THE LAST SCENE AS WELL...

Re: Wish list for future firmware releases

support@line6.com — Tue, 22 Jan 2013 11:28:40 GMT

ability to integrate some guitar amp SIM sa presets

Re: FX to Monitor B Spills to Monitor A

support@line6.com — Tue, 22 Jan 2013 10:44:24 GMT

There Is no effect send to monitor A - Effexts are sent only to monitor B.

Vocal channel has FX in Main out only.

Guitar has FX in Main out and Monitor B.

I hear FX PART OF THE VOCALS IN MONITOR B.

Amy solution?

Re: FX to Monitor B Spills to Monitor A

support@line6.com — Sat, 19 Jan 2013 15:26:35 GMT

An Update on this spillage problem....It seems that vocals to monitor A spills a bit to Monitor B.....

Sorry guys, I hope I'm not confusing the issue.....Help!!!

FX to Monitor B Spills to Monitor A

support@line6.com — Sat, 19 Jan 2013 12:50:03 GMT

Today I started soundchecking monitors and FX sends to Monitors. I Turned all FX sends to monitorA to 0 (OFF) AND a bit of FX A & D TO MONITOR B but I still get an FX D in Monit.B (Analog Delay) spillage to Monitor A wich should be dry! ....

I set main FOH speakers with Reverb and Analog Delay (FX A and FX D), but I'd like MonitorA ( Vocals) dry and Monitor B (Guitars) with some effects (A & D)

Any idea on how I can resolve this unwanted spillage of FX D in Monitor B (Analog delay) spilling to Monitor A?

I would appreciate some consideration to this case...

monitor send post EQ or pre EQ?

support@line6.com — Fri, 18 Jan 2013 21:28:43 GMT

Here I am again, now one more thing I need to clarify,

I understand I can choose between post faders and Pre faders....

I would like to achieve same sound on monitors and main

now the question is: is the monitor send post EQ or pre EQ?

put it another way: is the send to monitor post DSP block or Pre DSP block?

if the monitor send is post DSP block then its easy to achieve the main out sound on monitor speakers

Thanks for your patience with me..I'm trying hard to understand Stagescape routing in deep.

FX D to Monitors Spillage

support@line6.com — Fri, 18 Jan 2013 11:56:39 GMT

Today I started soundchecking monitors and Monitors presets. I Turned all FX to monitors to 0 (OFF) but I still get an FX D (Analog Delay) spillage to Monitors.

I set main FOH speakers with Reverb and Analog Delay (FX A and FX D), but I'd like Monitors dry.

Any idea on how I can resolve this unwanted spillage of FX D (Analog delay) to Monitors?