Community: Message List

Re: About POD HD 300

support@line6.com — Sat, 09 Mar 2013 15:58:25 GMT

Thanks for the clarification.

Re: About POD HD 300

support@line6.com — Sat, 09 Mar 2013 15:39:17 GMT

Does that mean that when I go out of my HD300, I need to use a stereo to mono adapter at the HD300 end when going to our mixer to get a summed mono signal? Thanks in advance!

Re: Help Pod 300

support@line6.com — Tue, 30 Oct 2012 16:04:22 GMT

Did you do the reset & calibration before or after updating the drivers? Should be after.

Re: Windows 8

support@line6.com — Sat, 27 Oct 2012 13:52:30 GMT

I've always found it's best to wait at least six months from initial release to upgrade to a new operating system, as there are always bugs that slip by initially.

Re: HD300 FLASH UPDATE FAILURE

support@line6.com — Fri, 26 Oct 2012 14:45:59 GMT

See your other post for a reply.

Re: POD HD300: Unable to update flash memory

support@line6.com — Fri, 26 Oct 2012 14:43:08 GMT

I didn't have an issue when I did my update. Try a different computer. That's the best suggestion I have. I don't believe it's the upgrade causing the issue.

Nothing will happen if you don't do the upgrade...you just won't have the new amp models. And you should revert back to the previous version of HD 300 Edit to be compatible.

Re: Use pod hd400 as an amplifier

support@line6.com — Sat, 13 Oct 2012 15:29:13 GMT

No. It's a preamp, not an amp. You'll have to get powered speakers or an amp to go into the cab.

Re: New to Pod HD300; Problem viewing/downloading custom tone

support@line6.com — Sat, 06 Oct 2012 16:58:04 GMT

It sounds like you haven't downloaded and installed HD300 Edit. Download Line 6 Monkey, connect your HD300 and download and install all updated programs and drivers suggested. Then, you should be able to open Custom Tone files.

http://line6.com/software/index.html

Good luck!

Bob

Re: This amp NEEDS to be modeled

support@line6.com — Fri, 14 Sep 2012 18:59:27 GMT

Sounds like Dr. Robert to me! Great tone. Haven't gotten that from any Vox modeller yet, whether Line 6, Vox or Fender (those I've tried).

Re: Reestablishing the Guitar Volume Pot

support@line6.com — Tue, 11 Sep 2012 20:27:19 GMT

Then it sounds like the guys who are telling you to turn down the output to 50% from the POD are correct. If it cleans up, the guitar volume is dropping, but the POD output is too high to sound like a volume drop.