Community: Message List

Re: Any news on a new firmware upgrade for M-line? M13-M9

support@line6.com — Mon, 17 Sep 2012 16:49:44 GMT

I don't really feel cheated if they don't.

In some way, i would.
Because they kept (keep) encouraging us to send features requests... if they are not taking this under consideration, they just should say: "Thanks for all the requests. but the updating process has come to an end".

Personally, if they don't release any new updates, i think they should, at least; make it open source... That would be great.

Re: MIDI Automation with a DAW

support@line6.com — Thu, 28 Jun 2012 18:35:47 GMT

Check this out. Lead guitarist uses an M13. Change of scenes or effects are controlled by Cubase (Laptop)

Re: M13-compatible Expression Pedals

support@line6.com — Tue, 01 May 2012 21:15:35 GMT

u$ 245 for an expression pedal...

Re: M13-compatible Expression Pedals

support@line6.com — Wed, 11 Apr 2012 20:27:16 GMT

Hey guys ! Do you think this Expresion pedal could work ?

LEEM EXPRESSIO PEDAL

Expression pedal to control line input instrument expression. The KY-30L uses a 20 K Ohm potentiometer to allow an excellent and accurate input signal volume adjustment. Supplied with a 6 feet terminated with a 1/4” stereo cable plug for connection to the volume or expression output of the keyboard.

PEDAL STRUCTURE : Thermoplastic ABS with galvanized weighted base.

IMPEADANCE : 20K Ohm (long-life linear keyboard potentiometer)

INPUTS : 1/4 Stereo plug.

http://leem.co.kr/english/contents/sub0201_1.php?menu_code=1&code=16&uid=131

Re: Line 6 M13 UK Mains Compatability

support@line6.com — Sun, 14 Aug 2011 21:26:24 GMT

i have an M13 that i bought in USA. The power supply is from UK, and i use it in Argentina (220v) Works flawlessly

Re: Volume Pedal in M13 Loop Fx

support@line6.com — Thu, 02 Sep 2010 16:42:15 GMT

weird.. i asked the same question a couple of days ago...
Here´s what they said...
http://line6.com/community/thread/42845?tstart=0

Volume Pedal in FX Loop. Hi or Low impedance ?

support@line6.com — Wed, 25 Aug 2010 14:22:48 GMT

what do you recommend ? High or low impedance volume pedal in FX loop ?

Re: RE: Issues on brand new M13

support@line6.com — Sun, 08 Aug 2010 18:19:42 GMT

you should have read my last post.. which is an update... i exchanged my M13, and the new one the sent has TWO scrambly screens !! not one, but two ! Come on!

Re: RE: Issues on brand new M13

support@line6.com — Sun, 08 Aug 2010 16:18:18 GMT

Well. after a long time, the new (replacement) M13 arrived home.. and guess what... not one, but two screens are malfunctioning... Guys.. what is going on with Quality Control ? Thumbs down

Re: RE: manual save ?

support@line6.com — Wed, 04 Aug 2010 16:09:43 GMT

alright.. it didn´t work well...
Let me tell you what happened.
a couple of weeks ago my FX in Row A were (in manual save mode):
1- Boost / 2 - Nothing / 3 - Nothing / 4 - Tape Delay, time 328 ms

i switched from manual save (MS) to autosave (AS) and then i changed some parameters on the effects, which is fine. My new set of FX was.
1- Boost / 2 - Nothing / 3 - Nothing / 4 - Digital Delay, time 480 ms

Then i switched back to MS, just to make sure none parameter could be changed accidentally.
Ok.. now i find i have to do some changes to FX 4 - Delay type and time. I changed the parameters and executed the "manual saving routine" you suggested above.. and gues what ? When i copied and pasted the scene what i got was the old set of effects !!!
----> 1- Boost / 2 - Nothing / 3 - Nothing / 4 - Tape Delay, time 328 ms !!

Something is wrong.. or the MS mode is just a save locking system, not a manual save mode.