Community: Message List

Re: using pod hd with a microphone

support@line6.com — Tue, 18 Sep 2012 04:54:39 GMT

Bean have microphone input and it's one of the main reasons I get it for harmonica. I've tried vintage mic pre. It works nice to boost amplifer secton or to add some edge to clean tone. For just clean tone it don't work.

using pod hd with a microphone

support@line6.com — Sun, 16 Sep 2012 17:53:14 GMT

Are there any users who use POD HD with a microphone or acoustic instruments?

Possible for vocals or for harmonica (like me).

I feel a bit uncomfortable in the beginning as all presets I made was a bit muddy (even all blocks bypassed) and I even get tired of it, but recently I turned Studio/DI mode to Power Amp ,ode and I was shoked as sound become much more clear and distinctive. Of course I get some harshness, but I can reduce it using some EQing. Any similar results?

Blend for cab in POD HD

support@line6.com — Wed, 25 Jul 2012 07:01:33 GMT

I just looked at Bass modelpack (which is not available for HD) and noted that it's possible to blend direct amp output and miced cab. Is it possible on HD. I know that it possible to split signal flow and to put the same amps with the same settings to the A and B positions, but it's not easy to control live and take a lot of DSP. It could be much easier to blend DI out and "miced" signal in the cabinet settings. Will it be available for the next firmwares?

Best small amp recomendation

support@line6.com — Wed, 25 Jul 2012 06:55:16 GMT

I play harmonica. I give up borrowing my pedalboard with me and get POD HD desctop as a main and only FX box.

So I'm working on creating my patches. It actually not easy to find best solution that will work for harmonica both live and studio.

So first problem I note is I really need my own amp onstage anyway. And it have to be not too big. I think it have to be less than 10 kg.

So I ask for reccomendation on best small amp/monitor for my POD HD.

Phil Jones Cub AG100? ZT Lunchbox? Fishman Loudbox? Peavey KB1 or KB2? Another loudspeakers? Powered monitor?

Any recomendations?

Re: Looper: pause during patch switch

support@line6.com — Tue, 10 Jul 2012 21:16:17 GMT

Yes, I've just resetted global settings, I didn't noticed that they were resetted. But it don't help.

Any more ideas? Is it possible to use 2.0 firmware instead of 2.2?

Re: Looper: pause during patch switch

support@line6.com — Tue, 10 Jul 2012 20:52:49 GMT

FAQ tells me that global reset is left arrow on navy + power on, nothing changes. Like a regular powering on.

Actually I really need looper to work fine.

Re: Looper: pause during patch switch

support@line6.com — Tue, 10 Jul 2012 20:16:14 GMT

USB cable is removed. Firmware is 2.2.

It seems for me that loop even slowing down a bit (time gap) while changing presets.

I will try global reset if nobody will give another solution (((:

Re: Looper: pause during patch switch

support@line6.com — Sun, 08 Jul 2012 08:00:34 GMT

POD HD desktop. The latest firmware is installed (2.0). Some interruptions (even looks that they are slightly affects timing) while changing presets. It looks unusable for real live looping. A bit disappointed. Is there a solution? New firmware? Looper is in post position. What's wrong???