Community: Message List

Re: RE: X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Mon, 23 Jul 2012 13:19:23 GMT

Thanx a lo to to everybody, everything's ok, firmware updated, pattern saved, guitar and voice runs perfectly, but now i plug guitar by direct input instead send/return...

Cheers, Carlo!

Re: RE: X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Mon, 26 Dec 2011 00:35:46 GMT

Ok, thanx a lot. I'll try in the next days...

Re: RE: X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Mon, 05 Dec 2011 06:12:15 GMT

No, is an old version but what happen to my presets in case of updating? Is possible a complete reset with the risk to loose all my sounds/patterns?

B: how can i update my firmware?

Thanx a lot...

Re: X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Thu, 20 Jan 2011 00:35:46 GMT

Ok, thanx i'll try in the next days and update you as soon as possible. Bye...

Re: X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Tue, 18 Jan 2011 11:10:03 GMT

Ok, here is my setup:

PEDALBOARD:

Guitar in: send

Live out: return (LEFT)

Guitar: head

Mic: Mic in

Direct out (LEFT): mixer

INPUTS PEDALBOARD ON DISPLAY:

Guitar: tone 1

Mic: tone 2

Enable/Disable global control???

OUTPUTS 1/4 INCH:

Mode: stack pwamp???

Tone 1 pan: left

Tone 2: mute

STUDIO/DIRECT MIX:

Tone 1: mute

Tone 2 on pan: left

Match studio direct

I hope to be clear and exhaustive, otherwise ask me what you need.

Thanx a lot, C!

Re: X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Mon, 17 Jan 2011 12:28:35 GMT

I think no, because it happens also when the tone 1 (guit) is muted or when the volume of my head is turned completly off... It seems like you cannot exclude/separate completly the output of the tone 1 inside the tone 2, so a little percent of the sound always goes in the tone2.

X3 live pilotare voce e chitarra- X3 live voice and guitar in the same preset

support@line6.com — Mon, 17 Jan 2011 00:16:31 GMT

Ciao, sto cercando di creare un preset dove nel tone 1 dovrebbe uscire la chitarra e andare alla mia testata e quindi poi alla cassa e nel tone 2 la voce in diretta nel mixer. Mi sembra di aver settato tutto nella maniera corretta ma ho sempre un piccolo rientro della chitatta nel mixer, qualcuno mi sa aiutare?

Grazie, Carlo.

Hi, i'm trying to create a preset where in tone 1 there is guitar (directed to my head and cabinet) and in tone 2 the voice (directed to the mixer). I think that's everything ok but a little "feedback" of the guitar always enter in the voice channel :-(

Someone can help me? Thanks, Carlo.