Community: Message List

Re: Recording Help

support@line6.com — Tue, 14 Aug 2012 14:12:27 GMT

Sorry folks, it was a dead cable!!

Recording Help

support@line6.com — Tue, 14 Aug 2012 13:45:03 GMT

Hi,

I have a mixer connected to the line inputs on the back of the UX2. The mixer has 2 instrument and mic inputs that can be recorded by selecting line 1 & 2 in gearbox and they record in stereo. However, I have my microkorg connected the left and right line inputs on my mixer and I cannot record by selecting line 1 & 2 in gearbox, I need to change it to line 2 only and the volume on my mixer shows that only one channel has volume, even though it plays back through both channels. If I connect my microkorg direct to the line inputs in the back of the toneport instead of the mixer, I can record once again by selecting line 1 & 2 in gearbox.

Therefore, I'd like to know if there is a reason why this happens as it means I cannot use the mixer to play guitar and microkorg at the same time.

Any help would be most appreciated!

cheers

craig

Re: Tone Library in Gearbox is a black screen

support@line6.com — Sun, 05 Aug 2012 18:18:48 GMT

excellent, cheers!!

Re: Tone Library in Gearbox is a black screen

support@line6.com — Sun, 05 Aug 2012 17:01:12 GMT

Does anyone know if the custom tones in the tone library will be available again?

Re: Toneport UX2 - Constant Buzz From Guitar Input

support@line6.com — Sun, 05 Aug 2012 16:20:14 GMT

Hi David,

Thanks for getting back to me. It turned out to be some electrical interference causing it!!!

Thanks for replying.

cheers

craig

Toneport UX2 - Constant Buzz From Guitar Input

support@line6.com — Mon, 23 Jul 2012 23:46:52 GMT

Hi,

I am getting a constant loud buzz when I plug my guitar into the guitar jack, I even get the loud buzz when I unplug the guitar and just leave the cable connected to the toneport. I've tried 3 guitars and they all get the same problem and I've also tried various cables and the problem persisted also. I have a microkorg connected to the line inputs at the back and the sound from that is crystal clear.

If anyone could offer any advice on this, or a possible solution, it would be most appreciated.

cheers

craig

Re: Toneport UX2 Pad Input

support@line6.com — Fri, 24 Jul 2009 17:29:10 GMT

cheers man!

Toneport UX2 Pad Input

support@line6.com — Fri, 24 Jul 2009 12:40:54 GMT

Hi,

Just a quick question. Can i connect a guitar to this input via another unit like a V-amp or similar?

thanks

craig