Community: Message List

Re: How can i know my Relay G30 transmission frequency?

support@line6.com — Sat, 15 Oct 2011 22:36:32 GMT

What kind of trouble are having with your G30??

The Relay systems operate in the Wi-Fi 2.4GHz range.

Re: Can the TBP06 be used with Relay G50 receiver?

support@line6.com — Fri, 14 Oct 2011 04:37:46 GMT

Yes, it is possible to use the TB06 transmitter with the G50 receiver.

Just make sure you match up the channels and it will work fine.

Anyone using Mid-Focus EQ live??

support@line6.com — Wed, 12 Oct 2011 01:06:08 GMT

Hi guys,

just wondering if anyone is using the Mid-Focus EQ in a live setting? It seems like it would do a good job of shaping a guitar tone to sit well in the mix.

Any thoughts?

Re: A suggestion regarding dual tone...

support@line6.com — Tue, 11 Oct 2011 23:39:54 GMT

+1 as well.

Dual cab/mic is exactly what I need. I've been trying to do the same thing by using the same amp model twice, with different cab/mic settings etc, however, it is very expensive DSP wise and I'm often left very restricted in what I can do effect wise.

Re: Options for fastening beltpack to strap or pocket?

support@line6.com — Thu, 06 Oct 2011 22:15:18 GMT

There are a few pouches around, but I'm not 100% sure which ones are suitable for the G50 transmitter.

I use a velcro strap which I have fixed to the transmitter. I clip the transmitter to the strap and then wrap the velcro strap around the transmitter and guitar strap and it locks it on to the strap.

Re: Relay G30 bodypack not powering up.

support@line6.com — Sun, 02 Oct 2011 22:12:36 GMT

sorry to hear you are having issues with the Line 6 Relay.

Contact the Line 6 service center and they will help you resolve it. The unit is still within its warranty period.

Re: Relay 50 cable modeling discussion

support@line6.com — Thu, 29 Sep 2011 23:04:27 GMT

khingpynn wrote:

Line 6 how would you describe the 15 different settings of the cable moddeler and how they effect overal guitar tone?

The cable settings basically changes the length of the cable.

It's just like grabbing a 10ft cable and plugging in, then a 15ft cable, then a 20ft cable etc.

As the length of cable increases the amount of capacitance increases which in turn reduces the amount of top-end in your overall tone.

Some people like low capacitance cable as it retains more top-end detail, while others use long cables on purpose to round off the top end.

The 15 different settings are just 15 different lengths of cable essentially.

Re: G30 dropout

support@line6.com — Mon, 19 Sep 2011 02:59:51 GMT

Good to hear that you fixed the dropout issue.

Re: G50 Transmitter

support@line6.com — Mon, 19 Sep 2011 02:59:11 GMT

Unfortunately it sounds like you got a defective unit.

I would exchange it for another one and give the G50 another try, it really is a fantastic wireless system.

Re: Relay internal digital setup

support@line6.com — Sun, 18 Sep 2011 23:18:41 GMT

go1dfish wrote:

Higher or lower than the 39063hz internal sampling rate of the PodXT series?

Why does it matter?