Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Wed, 21 Nov 2012 21:59:25 GMT

I realize this is a very old post and you guys probably don't care anymore but for the sake of people who google search it as I did, hopefully it will show up. I've been dealing with the same issues with the UX8 with Protools 9 on Windows. I wanted the same main output through both the 1-2 front and rear outputs, as well as the 3-4 front and rear outputs. I figured out a solution for getting them both to work simaltaneously!

First, go to Setup in your tool bar at the top of the screen.

Click on "I/O"

Go to "Output"

Create a New Path and make it Stereo

Click 3 and 4 in the cubes right of the new path

Click OK

Now in your session create two Master Faders

On the first make the output 1-2

On the second make the output 3-4

Go to an individual track and click on a box in "Sends A-E" section.

Go to output and click the 3-4 output.

You should be good to go! That will work for the mono 3-4 rear outputs as well as the front stereo 3-4 headphone jack. The volume seems to be a little lower than the main master fader but it works!

Community: Message List

Re: How do I configure UX8 to use 2nd headphone out?