Community: Message List

Re: Some Questions regarding this system

support@line6.com — Sun, 21 Apr 2013 16:02:03 GMT

Congrats on the DreamStage, I am wondering how the system is working with your electronic drums during live show? I've used the system with bass direct and set the crossover to 80 and worked well in tight areas where no room for bass amp (I use LINE 6 cables). Now I recently purchased the Roland TD-11 module for my V-drums in practice room - low volume. Wondering if I should bring V-drums for some live shows. How is it going for your live shows? Thanks

Re: firmware update -changing L6 Link presets resets my volume level

support@line6.com — Sat, 09 Mar 2013 00:03:47 GMT

thank you Arne for the fast reply, It's great news and it's great to have you and DBoomer here with us. I do want to push this faster so I input a request to LINE 6 product feedback and am hoping other forum users will do the same. Here is the link

http://line6.com/company/contact/productfeedback/

Re: Controlling M20D with Multiple iPads

support@line6.com — Fri, 08 Mar 2013 23:53:03 GMT

I had more feedback problems when I used my old K12 speakers with M20d. After updating to Stagesource it's only occasionally and usually due to being in small room where I have to put mains behind or to the side of the band or being in hurry and not able to run adequate soundcheck

Re: First firmware (bugfix) update - When ?

support@line6.com — Fri, 08 Mar 2013 14:22:50 GMT

I have trouble with EQ that didn't happen before the firmware 1.1 update. When I load an EQ preset it changes the main out volume to a different level while performing. And after loading, the new preset doesn't appear on the folder at top anymore. I'm not talking about a scene, it's an EQ issue. I never used the recording function before the update, but I do notice now that I can't stop it from recording a channel which is not being used on a particular song. What troubles are you noticing?

Re: firmware update -changing L6 Link presets resets my volume level

support@line6.com — Wed, 06 Mar 2013 06:15:09 GMT

There is a major bug that needs to be fixed. I was able to save a preset EQ in the main out folder but when loading it still resets the volume which is not good while performing and also the name of the preset never changes at the top left the screen after you load it. Is there a way to save & load an EQ preset that doesn't change main out volume to a different level while performing and ll actually show the new preset at top left? I know the work around was to save my own presets, but LINE6 needs to acknowledge that there IS a problem and that they can fix it

Message was edited by: Scott Hrebek

Re: Some Questions regarding this system

support@line6.com — Wed, 06 Mar 2013 05:11:18 GMT

I love the DreamStage. It all sets up fast and the speakers & sub are narrow when setup and load in & out is super easy. I've set up speakers behind and off to side with no problem. I use the ipad to control M20d and it's fun to invite guest musicians up on stage and walk around with mixer/ipad in hand. I am just starting to use live recording - no opinion yet. OR just keep what you got and get an old KB amp with 15' speaker for the drums.

Re: Android?

support@line6.com — Thu, 24 Jan 2013 07:31:17 GMT

Congrats on your dreamstage. I think you'll find that being able to use the ipad during the show is worth the extra money it costs over the android. I have a blast using stagescape on ipad and the musicians appreciate the control I have over the sound.

Re: firmware update -changing L6 Link presets resets my volume level

support@line6.com — Thu, 28 Feb 2013 14:09:49 GMT

Do you know when this repair to the problem of main stage volume goes to zero when loading EQ preset will happen ? It was working correctly before the 1.1 update

Re: should there be an L6 Link update?

support@line6.com — Wed, 20 Feb 2013 22:22:34 GMT

Any idea when the volume issue will get corrected?

Re: firmware update -changing L6 Link presets resets my volume level

support@line6.com — Wed, 20 Feb 2013 22:17:40 GMT

OK I understand, as long as it's easy and sounds good I'm happy, but the problem of the MAIN volume going to zero when I loaded a factory preset didn't exist before the update and it makes any presets somewhat unusable. Before the recent update I ran sound in a large hall and changed presets easily with no volume problem. I've never created a user preset on 31 band EQ and wonder if it is saved in the same folder?