Community: Message List

Re: Stagescape to USB to airport express not working!

support@line6.com — Tue, 19 Mar 2013 11:58:41 GMT

Hello,

Here is what I found to be the problem. I had an older Airport Express. It only hade one Ethernet port. Do you have the same one?

The newer Airport Express have separate Ethernet ports. My suggestion is to try a different rougher that has WAN and LAN separated. That was my solution. Now I have to go purchase the new Airport because I found Airplay to be very helpful.

Let me know it this works for you too. If not ill try to solve the problem on my a different way.

Re: Stagescape to USB to airport express not working!

support@line6.com — Fri, 01 Mar 2013 22:20:49 GMT

Did that. When I open the app on the ipad, I press "connect" but I can't find the stagescape in the list. It's just blank.

I am using last years Airport Express. It only has one Eathernet connection, in like the new one that has a WAN & LAN. Might that be the problem?

Stagescape to USB to airport express not working!

support@line6.com — Fri, 01 Mar 2013 08:47:26 GMT

Hello,

I could use some help. I am tring to run Stagescape with my I pad, here is the problem:

Stagescape is working. I plug in the "apple" USB to Ethernet. Connect it to an airport express. Go into the menu.

Stagescape only says "connecting to Ethernet network"(or something like that), then nothing. It will search forever.

I need help!

Some facts:

Stagescape, iPad, Airport all up to date.

Tried resetting Airport to factory, nothing. I can still plug in Internet, and works fine.

Everything just bought. Everything brand new.

Thanks.

Pod HD400 and AC-3

support@line6.com — Thu, 16 Aug 2012 20:49:40 GMT

Can I use the Fx send and return for connecting a Boss AC-3?

Re: POD HD400 with direct In-ear.

support@line6.com — Thu, 16 Aug 2012 20:45:58 GMT

Ya, the mini mixer seems the best way, it's just more gear. Thanks

Re: POD HD400 with direct In-ear.

support@line6.com — Thu, 16 Aug 2012 04:29:16 GMT

That's pretty good thinking. But have tried sending the Vocal to the Pod and it's a very low signal, if heard at all. I am using real IEMs, e3000 with the body pack. Most of the time I have it set up through a LS9 system but I'm am at a different venue now.

I have run stereo currently. Left goes to main house and right goes into the e3000 and runs mono for IEM. (this is for the HD400)

Do you think this would work for the vocalist 3 as well? But run the e3000 stereo. I think that would mean one ear would hear guitar and one vocal; will this break something?

POD HD400 with direct In-ear.

support@line6.com — Wed, 15 Aug 2012 23:04:35 GMT

Tring to figure out a different way of setting up my gear and any input would be nice.

I'm running a Pod HD400 and a Vocal Live 3. Is it possible to run both is stereo, Left to house system, Right to IEM. Can I do this? I play at a church now that has very limited resources, not enough to give me a monitor and I normally go direct into the house mixer.

Anyone has any helpful advice (besides buying a system)

Thanks.

PodHD 400 Loud Burst

support@line6.com — Wed, 11 Jan 2012 03:12:56 GMT

I have been been having loud burst while playing through my PodHD 400. I am running the latest updates from Line 6. As I play thing sound good but then it suddenly has a BIG burst of sound and becomes distorted. I tried changing patches but that does not seem to help. Unplugged, then plugged back in, but again no help. Checked different cables, same problem.

I just got this pedal back from the mainland(I live in Hawaii) because of the volume pedal and don't want to have to pay to send this back again. They just sent me a replacement pod.

Anyone got and ideals on how to fix this?

Re: RE: Loose a/c power adapter to receiver?

support@line6.com — Tue, 15 Nov 2011 16:45:25 GMT

Thanks for the help. But the downer is I live on Oahu.

Loose a/c power adapter to receiver?

support@line6.com — Thu, 10 Nov 2011 01:08:49 GMT

I have just purchased a new relay G30, I am having problems with the a/c power adapter. When I plug it into the floor reciever it seems really loose and i can "wiggle" it around. Is there a fix or something else.

Is this a common problem?