Community: Message List

Re: PLZ HELP!

support@line6.com — Tue, 09 Mar 2010 04:46:29 GMT

From the manual (available for download)- Chapter 6, page 5:

What if you want to tune to a different reference than A=440Hz? When you’re in the tuner mode, turn the

Mid knob on the Flextone while watching the display on the Floor Board. Hey, it changes! You can

set the reference frequency anywhere from 435-445Hz. This setting is stored so you don’t have to reset it every time you turn on the amp if you decide you want to be different (or if that piano in your rehearsal room has decided to be different).

Re: Flextone 2 and FBV4

support@line6.com — Wed, 17 Feb 2010 01:09:53 GMT

If you're just looking to change patches, try the Tech 21 midi mouse - works great. Small, runs on batteries. Heres one on Ebay:

http://cgi.ebay.com/Tech-21-Midi-Mouse_W0QQitemZ160404920406QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item2558e0d856

Re: Where can I find the old SoundDriver software for POD 1.3?

support@line6.com — Thu, 21 Jan 2010 05:10:26 GMT

It's still available here -

Go to downloads, put in POD 2.0, XP and check the "archived" button. It's the one at the bottom.

It works fine with XP.

Good luck!

Re: Pocket POD registered to my Account - Line6 Monkey says it is not.

support@line6.com — Sun, 15 Nov 2009 17:08:49 GMT

From the Line 6 Monkey FAQ'S:

Q: Why does Line 6 Monkey ask me to register my device even after I already have?

A: This is a known issue with Line 6 Monkey. The program is set to constantly remind you to register your gear. As a workaround, when Monkey asks you to register your device, please click on "Remind Me Later.

Re: RE: My POCKET POD not recognized by Monkey - PLS HELP LINE 6! URGENT

support@line6.com — Mon, 26 Oct 2009 20:25:13 GMT

This has come up numberous times now - can someone from Line6 please add to the announcement that if it says the PocketPod is not registered, you just have to click on "Remind Me Later", then proceed and it will work fine.

Good Luck!

Re: Pocket POD update issue

support@line6.com — Wed, 14 Oct 2009 02:59:50 GMT

Read this thread:

http://line6.com/community/thread/19954?tstart=30

Re: Pocket POD update issue

support@line6.com — Wed, 14 Oct 2009 02:58:09 GMT

When it says "Register Now" or "Remind me Later" Just click on "remind me later"

Re: Registration problems......no updates for you!!!

support@line6.com — Wed, 14 Oct 2009 02:56:33 GMT

"I will see if this will allow me to get recognized via the USB connection by my recording software and finally lay down some tracks"

I could be wrong, but it sounds like you think you can record with the Pocket Pod using USB. You can't - the USB carries no audio on the Pocket Pod. You have to use the analog outputs. Hopefully, I'm mistaken......

Re: Registration problems......no updates for you!!!

support@line6.com — Tue, 13 Oct 2009 04:39:36 GMT

When it says "Register Now" or "Remind me Later" Just click on "remind me later" - see this thread:

http://line6.com/community/thread/19954?tstart=0

Re: Pocket POD and registration issue in Monkey

support@line6.com — Sat, 10 Oct 2009 05:06:37 GMT

It said mine wasn't registered either. I just clicked on "remind me later", kept going and it updated it fine.