Community: Message List

Re: HD500 - what do you use for solo boost?

support@line6.com — Thu, 18 Apr 2013 00:21:03 GMT

i have a rythmn and lead patch

same patch except the lead one is running at 60% vol and my rythmn patch is at 50% volume

Re: FBV mk2 volume controlling via 75 watt spider 4

support@line6.com — Thu, 18 Apr 2013 00:18:24 GMT

it has actually turned out to be,my fbv mk2 pedal was not calibrated correctly

there is a procedure to re-calibrate pedals

followed out the set up calibration instructions and its fine now

FBV mk2 volume controlling via 75 watt spider 4

support@line6.com — Mon, 15 Apr 2013 00:20:53 GMT

i have had this amp almost 2 years

have read the manuall and followed the steps i believe to be correct

I created a patch of my own,stored it in a bank,however its giving 100% volume with the pedal ful forward but full back i want the volume to 0% but i would say full back its pulling the volume back to around 40%.

Tried....yes..i have tried to correct this via the edit but to no avail!

Anyone know how to tweak this so i get 100% forward and 0% pulled back on the pedal?

Spider III/150 watt powers up and shuts off!!!

support@line6.com — Sun, 19 Aug 2012 09:14:44 GMT

KK......my buddy and I both use line 6 amps but we were playing at a gig that hosted 4 bands last night.

First band that went on were using my buddies combo spider 3/150 stereo amp.

band went on,did their thing for 45 mins and left.

my buddy went onto stage to do his stint.turns on his amp,lcd lit up as normal and could hear the speaker kicking in,it stayed on for around 2 secs and just shut off.

Also,this amp wasnt overheated as from the time the previous band had played,until he then switched it on,the gap in time was maybe an hour.

he really isnt happy today about this!

Re: spider4/75 volume controlling???

support@line6.com — Sat, 03 Mar 2012 09:54:48 GMT

OK....so...after I have the vol level adjusted in the edit mode....how do you save it to that specific tone?

spider4/75 volume controlling???

support@line6.com — Fri, 02 Mar 2012 01:16:57 GMT

ok....I have had my 75 for a few months now,love it to bits,one of the best built amps i have ever owned.

One issue I have...as a gigging guitarist,I feel limited in the tone,s I can use and normally stick to one tone.

The issue is that when the soundcheck is done initially and all the levels between guitar and bass are set up,if,during our set list I find I want to change to another preset,I find it can be either louder or not as loud as the initial sound check when i change channel from my fbv express mk2.

Does anybody know how to set the amp so that if you change channel,the same volume level is maintained regardless?

Great amp but this is the only down side from my perspective but i am quite sure the more technically minded on this forum know exactly how to cure this and set the amp up so it will maintain its volume level.

Re: Share Your Line 6 Spider IV Settings

support@line6.com — Tue, 01 Nov 2011 00:36:35 GMT

Any ozzy fans...I just created what I feel is pretty close to the sound jake e lee used on the song lightning strikes so if you wanna try it and maybe alter it or give me some feedback,try it from the customtone downloads for spider4 75watt.i think its such a killer tone !

Store your own setting on spider 4/75,how to?

support@line6.com — Thu, 11 Aug 2011 07:49:23 GMT

i set up my amp to my own preference but how do i save this setting on the amps computer and can i change the name on the display to name this sound?

The name i want to give the sound is "shot in the dark"(i have the sound very close to jake E lee,s sound on the ultimate sin album)

thanks

how do you switch from volume to wah on the mark2 shortboard?

support@line6.com — Tue, 09 Aug 2011 23:20:48 GMT

i just got my new spider 4 (75) today and the FBV mk2 along with it but how do you change from volume to wah?

Mine is on volume and the volume led is on but really i want to activate the wah

Totally fantastic ,brilliant amp...especially the no more tears sound