Community: Message List

Re: Formating and deleting Files on SD Card

support@line6.com — Tue, 30 Oct 2012 13:59:44 GMT

No idea?????????????????????

Formating and deleting Files on SD Card

support@line6.com — Fri, 26 Oct 2012 12:03:59 GMT

Is there any chance to delete recorded Tracks on the SD Card or complete formating the SD Card via M20D?

Or do i need always a Computer?

Re: Phantom Power suddenly dead...

support@line6.com — Fri, 19 Oct 2012 21:05:16 GMT

Mhhhhhh.

But does the Firmware kill the Hardware?

is their any Chance to geht the phantompower back without sending the Mixer to the Service?

Phantom Power suddenly dead...

support@line6.com — Fri, 19 Oct 2012 06:35:29 GMT

Yesterday the second row (chanels 7-12) lost their phantompower. I can push the phantompower "button" but it doesn`t work.

And yes....i`ve tested the cabels and microphones by plug them in the first 6 channels..and they work well.

so it seems that the phantom power on the second row is dead.

Is their anyone else with the same problem?

Re: Recording all channels, Monitoring Some channels and some channels to Main Out at One Time

support@line6.com — Fri, 19 Oct 2012 06:32:21 GMT

Thanx Dave!

I will try this asap.

Recording all channels, Monitoring Some channels and some channels to Main Out at One Time

support@line6.com — Thu, 18 Oct 2012 21:04:55 GMT

I didn't find Out yet....

Is it possible to Record 12 channels at the Same Time, while channels 1-4 going to a Monitor but Not to the Main Out, and channels 7&8 going to Monitor and to the Main Out?

I want to Record a rehearsel, give some Instruments to the Drummers headphone (Monitor) and only the Vokals to Main Out (pa).

Any Solution?

Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers

support@line6.com — Tue, 16 Oct 2012 09:12:40 GMT

it works....

it was my mistake of the way of cabeling....

but what i`m wondering about is:

if i connect the subwoofer first (Line6Link) then to the first top (which is on the subwoofer. with Line6Link) then to the second top (with line6link) the tops get the wrong number. means the left one in the right and the right is the left....

if the way of cabeling is: subwoofer-> top (which is not on the subwoofer)-> then from top to top which is on the subwoofer, everything is right.

where is my mistake?

Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers

support@line6.com — Mon, 15 Oct 2012 19:57:39 GMT

I tried this...

Analog Input (xlr) into the subwoofer and zehn with One aes/ebu cable per line6link to One Top.

It doesn't work.....

Am i Wong?

Re: Connecting an M20D and a analog Mixer to the Stagescape Speakers

support@line6.com — Mon, 15 Oct 2012 11:49:12 GMT

So...there are two possibilities....

Analog or digital.

There is no other solution? For example:Analog output from Mixer to Subwoofer and then by Line6Link to the Tops?

What means "they are both active"?

Connecting an M20D and a analog Mixer to the Stagescape Speakers

support@line6.com — Fri, 12 Oct 2012 11:07:00 GMT

it is me again.

I connected my 2pcs L3T and my L3S via Line6 Linke to my Stagescape M20D and it works fine.

The second Band in our practice room wants to use the L3x Speakers too But they uses an analog Mixer with XLR outputs.

How can i connect this Mixer to the speakers, without uncabling my Line6Link Configuration?

What will be the best solution?