Community: Message List

Re: Connecting POD 2.0 to a Mixer

support@line6.com — Mon, 19 Nov 2012 14:40:39 GMT

Okay, got it...

Pod left output ST left return on the mixer, Pod right output to ST right return on the mixer and Pod input to FX send on the mixer-seems to work for me.

Thanks

Re: Connecting POD 2.0 to a Mixer

support@line6.com — Fri, 16 Nov 2012 17:50:44 GMT

My current setup involves voodoo labs GCP and GCX switcher gear and the guitar starts with a volume pedal at the beginging of the chain. My AMP FX loop is dedicated to a pro G decimator. So, my goal is to keep the POD isolated from the AMP head/cabinet and switch through to a mixer with output from the PA spk. This would allow me to use all the POD functions in direct mode, through the mixer and out the PA spk. So, connections from the POD (outputs & input) to the mixer (mackie Pro fx 8) have me scratching my head a bit.

I hope this helps and any new info is appreciated.

Connecting POD 2.0 to a Mixer

support@line6.com — Wed, 14 Nov 2012 04:11:55 GMT

Hello,

New to the POD 2.0 and I am looking to connect to a mixer and was looking for any info. I'm thinking POD left output (mono) to mixer mono return and POD input to mixer FX send, but was not sure...suggestions appreciated.

Thanks

POD 2.0 and voodoo lab GCP GCX

support@line6.com — Wed, 31 Oct 2012 17:34:42 GMT

Hi,

Just purchased a POD 2.0 and before I start the process of connecting everything together I want to ask the Line 6 community if anyone can sugguest the best way to connect or examples of how they connect the POD 2.0 with Voodoo Labs ground control pro and GCX audio switcher?

Thanks

Richie

Pitch and sound

support@line6.com — Fri, 08 Apr 2011 13:40:54 GMT

Hi,

It is possible to change the pitch via software to match the specific guitar I am using? I use E-flat and find when track jamming the song is in E. Also, looking to purchase GPO for the year, but noticed during track/jam the sound (at times) becomes digitally distorted and/or "crackly", etc..

Great product though...

Thanks

Re: RE: MkII 212

support@line6.com — Tue, 29 Mar 2011 02:47:35 GMT

Thanks Line6Perry for adding to Kyle21B comments. Great input and will give it a shot. I use the Shortboard pedal volume, but will save livingroom level preset.

Re: MkII 212

support@line6.com — Tue, 22 Mar 2011 20:30:40 GMT

I also have the shortboard and will try the pedal, as you sugguested. I just hope I can find my volume before I lose my hearing!!

Thanks

MkII 212

support@line6.com — Tue, 22 Mar 2011 20:17:14 GMT

Hello,

I recently purchased the 212 and it is a very loud amp! I generally practice at low volumes and working to find the sound down low. The master volume is extremely touchy, in the sense, that it can blow your ears out with the slightest touch (or if you switch presets). So, at low volume do other users of this amp find it best to keep the channel volume and guitar up and the master set low or other. Please advise if possible.

Thanks

Re: MKII 212

support@line6.com — Mon, 21 Mar 2011 13:08:25 GMT

Thanks for your reply. It does seem that is the case and I will tool around and find my sound within the line 6. Yes, I have updated and should be good to go. Again, thanks.

MKII 212

support@line6.com — Mon, 21 Mar 2011 00:53:07 GMT

Hello,

does anyone reccomend/use a distortation pedal outside of the factory MKII settings. I have tried a carl martian Pelxi and a Boss, but but are very noisy (power hum) when volume turned up, Not as bad when using the line six only, but wanted more control, Please advise.

MKII 212 user