Community: Message List

Re: Controling inside presets effect in POD HD500 in "ABCD" mode

support@line6.com — Sun, 09 Sep 2012 20:43:29 GMT

Thanks man!

Seems like you solved my problem!

Will the FS1-FS4 change with the same CC no matter the preset\bank changes?

Re: Controling inside presets effect in POD HD500 in "ABCD" mode

support@line6.com — Sun, 09 Sep 2012 12:35:33 GMT

While I'm waiting for an answer, O'm trying to do this myself

So I go to "Midi Assign" on the POD HD 500

"Footswitch" = FS4

MIDI CH - 01

MESSAGE - "Note On"

Note - C1

Velocity - 127

Then I go to Cubase , open a midi channel on 01, see that my POD responds (It responds to preset changes) , write C-1, C1, C2 (just in case there' an offset between Cubase and POD)

Nothing happens!

I also tried to do that with CC

Another strange thing is that I can't save midi assign in anyway, or remove it in anyway on the POD HD Edit

Anyone managed to do that before and have any tips?

Message was edited by: raz klinghoffer The only thing I'm trying to do is ON\OFF to FS4 through my Cubase in ABCD mode

Re: Controling inside presets effect in POD HD500 in "ABCD" mode

support@line6.com — Sun, 09 Sep 2012 07:48:21 GMT

Thanks

What I want is more simple

I want to be able to turn on\off an effect inside of a preset

Is ths possible?

Controling inside presets effect in POD HD500 in "ABCD" mode

support@line6.com — Sat, 08 Sep 2012 22:33:26 GMT

Hey everyone

I just finished programing my Cubase to change my presets on our live set

My question is, can I change the inside effects (like delay and harmonizer) in addition on ';ABCD" mode?

How do I do that?

Thanks!

Re: Using Pod HD 500 as an audio interface and controling it with midi

support@line6.com — Sat, 08 Sep 2012 16:30:05 GMT

Ok thank you!

Re: Using Pod HD 500 as an audio interface and controling it with midi

support@line6.com — Sat, 08 Sep 2012 06:49:32 GMT

If I hade a usb to midi device I wouldn't have asked this question in the first place

But thanks!

Re: Using Pod HD 500 as an audio interface and controling it with midi

support@line6.com — Fri, 07 Sep 2012 23:07:11 GMT

Thanks

I want to use Cubase, and want it to control the POD HD500

it's not about the plugin really, it's about the way POD HD can understand that the midi out is used as an audio device, and midi in as the POD effect board

Re: Using Pod HD 500 as an audio interface and controling it with midi

support@line6.com — Fri, 07 Sep 2012 19:14:47 GMT

Anyone can confirm that I can control POD HD500 midi by plugin midi in ti midi out?

Re: Using Pod HD 500 as an audio interface and controling it with midi

support@line6.com — Fri, 07 Sep 2012 12:55:33 GMT

Awesome

So connecting midi out to midi in is fine?

Re: Using Pod HD 500 as an audio interface and controling it with midi

support@line6.com — Fri, 07 Sep 2012 07:09:43 GMT

Thanks

I know that I can use Pod HD as an audio interface and I know I can control him with midi

My question is can I do both at the same time?

And if so, should I connect a cable from midi in to midi out to send him the midi from the sequencer?