Community: Message List

Pod x3 live ASIO 24 bit 96000

support@line6.com — Wed, 21 Dec 2011 00:40:05 GMT

I'm using my pod x3 live as an interface for recording. I thought that It did 24 bit at 96000 but the driver will only let me get as high as 48000 in the ASIO control panel. Is there a reason it doesn't go up to 96000?

Re: RE: JTV-59 connected to X3L via VDI breaks X3L tuner function

support@line6.com — Mon, 01 Aug 2011 23:24:08 GMT

I have a jtv-69 and the same thing happened to me while playing a gig Saturday.

Tuner gets stuck on B.

Re: jtv and x3l via vdi

support@line6.com — Wed, 13 Jul 2011 19:32:59 GMT

I had the same problem when I first got my JTV and went through all the steps to solve it that other posters have given here only to find out I had a bad VDI cable (it was a brand new cable).

One way to check that is take the cable that came with your JTV that plugs into the USB converter. It's the same kind of cable (cat5) without the metal casing one end and plug it in and see if you get sound. If so you need to replace the VDI cable.

Re: JTV 69 problems

support@line6.com — Tue, 14 Jun 2011 20:06:40 GMT

If you're using x3 live with the VDI make sure your firmware on x3 is up to date and that your tone input is set on variax ch1 on input one and same on input two. Also make sure your volume is up enough that you aren't hearing the natural string tone. I found that when I used the regular 1/4" jack I needed to set the output pan to the center on both channels on the x3.

Re: Help needed on editing alternative tuning presets on JTV-69

support@line6.com — Thu, 19 May 2011 00:41:31 GMT

Here's the best in-depth tutorial on workbench I've found. Hope this helps.

Re: Need help doing Alt Tunings on 12 string in workbench

support@line6.com — Wed, 18 May 2011 21:51:43 GMT

Thanks for the help self!

Re: Need help doing Alt Tunings on 12 string in workbench

support@line6.com — Wed, 18 May 2011 21:51:00 GMT

Once again I found the answer to my question.

Anyone needing an in-depth up-to-date tutorial on Workbench here you go.

Need help doing Alt Tunings on 12 string in workbench

support@line6.com — Tue, 17 May 2011 20:15:29 GMT

I have been able to figure out how to create and save alt tunings in Workbench on all the models except for the 12 strings.

Is there any links to info on how to do this or any vids?

The other alt tunings were a breeze but I'm just not getting the steps to create them for the 12 string models.

Re: Expected Release Date???

support@line6.com — Sun, 15 May 2011 19:49:26 GMT

I've seen a few on here with the rough neck issue. My neck was smooth too and I really like the satin finish. All my guitars had been laquer finishes on the neck so I wasn't really sure how I would like the finish but I found I prefer it to the laquer. I wonder if it's just a luck of the draw?

Re: Expected Release Date???

support@line6.com — Sun, 15 May 2011 17:41:45 GMT

As far as the release date, they are trickling in. I got mine about 4 weeks sooner than my dealer anticipated.

JTV-69 CAR and I love the thing.

As for people bemoaning the headstock that's just a matter of taste. As a person who makes his bread and butter in art and design I'd bet Line6 could come up with 1000 different variations of headstock and someone would still complain.