Community: Message List

How to get a good sound with an acoustic guitar

support@line6.com — Sun, 21 Apr 2013 16:05:34 GMT

Hi,

I have an 20D with 2 L3Ms and have problems getting a good sound with my acoustic guitar. I have a Baggs M80 soundhole pickup installed in my dreadnaught Martin HD28 and the sound I get in the speakers is slightly aggressive and medium. I tried to remove 2 frequencies (400kHz and 1200kHz) but I still get a sound that is not very pleasant to my ear.

Any advice with this PA? Thank you!

Do I need a DI Box?

support@line6.com — Fri, 29 Mar 2013 08:08:49 GMT

Hi,

I plan to buy an LR Baggs M80 for my acoustic guitar (it can be set to active or passive mode). Do I need a DI Box to connect to the StageScape? If so, should it be active or passive?

I play about 2 meters away from the StageScape.

Thank you for your comments.

Cheers

Re: Aux outputs

support@line6.com — Sat, 16 Feb 2013 08:22:27 GMT

But there's a big plus in favor of stereo in-ears: the quality of the sound! If you've never tried stereo in-ears instead of mono, you should.

And musicians rarely move from left to right on the stage while playing. Stereo sounds also really good for the audience and you just should not pan hard left or right. A stereo chorus effect for instance sounds really good in the PA for a guitar.

Re: How 2 pan an input with a stereo monitor pair?

support@line6.com — Fri, 15 Feb 2013 08:02:22 GMT

Thank you. It's too bad because I wanted to recreate in my IEM the environment I have on stage. For instance I wanted to pan the other singer a bit to my left and my own voice in the middle without changing what the audience hears...

I think panning in the front PA and the stereo monitors should be independant, just like volumes, or there should be a function to make it so.

How 2 pan an input with a stereo monitor pair?

support@line6.com — Thu, 14 Feb 2013 15:38:39 GMT

Hi,

I created a stereo monitor for my IEM system but how can I pan an input more left or right in it? Thank you.

Cheers

Re: How to make 2 monitors a stereo pair?

support@line6.com — Fri, 01 Feb 2013 18:51:10 GMT

I had already looked in the More folder but did not realize it was in the Output subfolder... :-) Thank you Arne!

Re: How to make 2 monitors a stereo pair?

support@line6.com — Fri, 01 Feb 2013 15:26:14 GMT

There's no "stereo monitor" icon in the library, only a "monitor" icon...

Re: How to make 2 monitors a stereo pair?

support@line6.com — Fri, 01 Feb 2013 07:31:34 GMT

Nothing appears when I plug in the XLR cables. Do I have to delete the monitors I had up to now to recreate them as a stereo pair? But then it means I will lose the settings...

How to make 2 monitors a stereo pair?

support@line6.com — Thu, 31 Jan 2013 08:47:41 GMT

Hi,

I have 2 in-ear monitors in my setup (left and right) and I'd like now to make a stereo pair with the new SS version. I follow the instructions in the latest user manual but when I select one of the monitor icons a Make stereo button will NOT appear. How come? Thank you.

Cheers

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Wed, 30 Jan 2013 17:52:41 GMT

Yes I had to create a specific folder for the backup file otherwise it does not work if I want to save the backup file to the root of the SD card.

So I applied the update (fingers crossed!) and restored my backup file and all seems to be like before in my setup. The Record utility is far better and all my recordings work now.