Community: Message List

DT50 L6Link and 1/4inch Out Control. Help.

support@line6.com — Mon, 16 Jul 2012 02:57:03 GMT

Help?? Can't seem to gain control of outputs on HD500 like I use to on XTLive.

Config:

DT50 212 plugged into HD500 via L6Link.

RCF ART310 Powered Monitor plugged into Right 1/4inch Out.

Requirement:

In a single HD500 patch, have ONLY DT50 audiable and RCF muted. Then on another path have the opposite. This is so I can put the accoustic, banjo etc of the JTVariax out to the RCF while muting the DT50 and then have the opposite when I play the other electric guitar models. Like to keep the L6Link in the mix so I can control the DT50.

Variax JTV + HD500 + AMP?

support@line6.com — Wed, 16 May 2012 09:19:17 GMT

Which line 6 amp should I use to get the best out of Variax JTV + HD500?

I use most things on Variax; acoustic, banjo, strat, sg and a number of amp models as well as none for the acoustic instruments. Dont want the acoustic having that brittal sound you get when you plug it into a standard tub amp and dont want my strat to sound like its going though a cheap solid state.

So which will be my ultimate work horse?

Currently using a pair of RCF310 Arts which is cool but I miss that amp expereince.

Does the new JTV send midi data?

support@line6.com — Thu, 12 Apr 2012 04:21:48 GMT

Does the new JTV send midi data? Can it be used with the PODHD500 to send midi data, midi signal?

Re: Global EQ Output

support@line6.com — Tue, 20 Mar 2012 12:59:18 GMT

Thanks. Just posted reply. Seems like a few people would want this feature and I dont think it would drain DSP or mess to much with software framework, after all its just simply global output setting and I am sure they have that isolated already in the software structure.

Global EQ Output

support@line6.com — Tue, 20 Mar 2012 10:19:24 GMT

Any way of creating a global EQ ouput setting?

This will allow tweaking for different performance spaces without having to apply across all patches.

Re: Strange Battery and Cable Jack Input Issue

support@line6.com — Tue, 20 Mar 2012 09:41:14 GMT

All sorted. Had the battery compartment swapped out and all is well

Re: Strange Battery and Cable Jack Input Issue

support@line6.com — Thu, 15 Mar 2012 11:30:53 GMT

Thanks for the Reply Hugo. Much appreciated.

I waited nearly 3 months for this baby and just can't bare the thought of being without it for too long, which I know will be the case, as your service center here in Australia is in Melbourne and I am in Sydney. I did get some very helpful information through a friend of mine who knows someone there at Line6 headquarters. I am going to take it to the shop I purchased it from and get them to swap over the entire batter compartment. Its a very easy job, about 5 mins. The feedback I got was that it may be that. Failing that I will have to send it to Melbourne.

Here is actual video I took of the bug occuring...does look a lot like hardware, battery related, but not battery charge. You can see the battery is fully charged and has been like that since I carefull gave it full overnight charge before use.

http://www.youtube.com/watch?v=aly7wSnYY78

Strange Battery and Cable Jack Input Issue

support@line6.com — Tue, 06 Mar 2012 15:59:34 GMT

Just got my new Line6 JTV-69 sunburst after waiting many months.

Before I describe issue please note I have returned to the Music store to do battery A/B testing with another Variax. So we have ruled out that it is battery related.

So with the battery fully charged this is what happens:

# Plug variax data cable into POD500 everything works fine.

# Plug 1/4 cable in and only real pick-ups work, battery life indicator lights stop working altogether, battery shuts down. no variax operation at all.

# Pull 1/4 back out and plug in variax data cable with 1/4 inch and all works fine again.

# Plug 1/4 and Variax data in together and both real pickups and variax sound work, which is an odd sound and I dont think is suppose to happen.
# Nothing plugged in battery life indicators work fine but if you push a 1/4 inch in, all stops immediately.

So somthing is misbehaving with the 1/4 jack. It seems to turn off the digital environment and battery when plugged in. May be related to the battery life saver process I read about which turns the battery off when you pull out the 1/4 inch cable and turns it on when you plug it in again.

So my conclusion is the wiring, or signal-trigger, or software or hardware or somthing is backwards, crossed, so its operating the 1/4 jack in the reverse of what it should.

Anyone had this, know a fix, ideas on solutions besides sending it back for repair just yet?

I have already fallen deeply in love with this instrument and would hate to be seperated from it for more than a few nights.

Your sad but hopeful Tyler Variax owner

Todd - Australia.

Re: Strange Battery 1/4 Jack Bug

support@line6.com — Tue, 06 Mar 2012 16:17:11 GMT

Thanks Sleverhead for the quick response. I should have included this, which I have now: "....please note I have returned to the Music store to do battery A/B testing with another Variax. So we have ruled out that it is battery related."

Re: Factory, Wholesaler or Store Damage?

support@line6.com — Thu, 27 Jan 2011 10:33:25 GMT

Thanks