Community: Message List - How do I configure UX8 to use 2nd headphone out?

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Wed, 21 Nov 2012 21:59:25 GMT

I realize this is a very old post and you guys probably don't care anymore but for the sake of people who google search it as I did, hopefully it will show up. I've been dealing with the same issues with the UX8 with Protools 9 on Windows. I wanted the same main output through both the 1-2 front and rear outputs, as well as the 3-4 front and rear outputs. I figured out a solution for getting them both to work simaltaneously!

First, go to Setup in your tool bar at the top of the screen.

Click on "I/O"

Go to "Output"

Create a New Path and make it Stereo

Click 3 and 4 in the cubes right of the new path

Click OK

Now in your session create two Master Faders

On the first make the output 1-2

On the second make the output 3-4

Go to an individual track and click on a box in "Sends A-E" section.

Go to output and click the 3-4 output.

You should be good to go! That will work for the mono 3-4 rear outputs as well as the front stereo 3-4 headphone jack. The volume seems to be a little lower than the main master fader but it works!

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Wed, 29 Dec 2010 18:23:01 GMT

i have the same problem as well, i need both headphones to be on the same output. i am sure line 6 thought about that, how can use them both ?.

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Tue, 14 Sep 2010 08:08:32 GMT

I can only get headphone 3-4 to work when routing to the output 3-4 THROUGH MY DAW (Cubase)

that's not what I want, I just want a duplicate stero 1-2 out so i can monitor on both heaphone outs!

The illustration above shows you can only select/mute input sources - that' not what many of us want to do.

commnets, Line 6?

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Sun, 29 Aug 2010 20:54:36 GMT

Has anyone been able to get BOTH headphone outs to work simultaneously? I've looked through the forums, followed the limks and except for the fact that I haven't read all 223 pages of the manual, can't figure it out. HELP!!!

Curt

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Thu, 11 Jun 2009 17:19:30 GMT

I have the same problem.... No Mater what I do, it does not show any signal going to output 3-4

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Fri, 20 Mar 2009 20:07:05 GMT

Thanks but I had tried all of that settings. After calling my dealer hotline it seems that headphone outputs of my UX8 units are out of order (or never connected inside the box)

So I'm waiting a new UX8 !!!! I hope all would be fine this time...

I'm relatively good with audio interface cause I began audio diect to disk in the middle of 90s. I used Direct Pro 24/96 from aardvark, and recently M-Audio FastTrack Ultra. UX8 seemed good for me because I try to play guitar and I love POD FARM and Gear Sounds !!!!(better than Guitar Rig in my own opinion)... On the road, I play with a pocket POD (nice).

I work with Ableton Live 7, Reaktor, Massive, Absynth, battery 3.

I record my guitar sessions improvisation with RiffWorks (great tool)

Best regards

Tiburce

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Fri, 20 Mar 2009 18:22:12 GMT

You need to adjust the Output settings for 3-4 mix using the Line 6 Audio-MIDI Devices program.

On Windows: Start/All Programs/Line6/Tools/

On Mac OSX: Mac/System Preferences/Other

In this example, the headphone mix for Main (1-2) indicates that ALL input sources will be present (note that the panning can also be adjusted)

Here, we see that the default mix settings for Outputs (3-4) which is headphone output #2 on the UX8. All sources are defaulted to be "muted". Uncheck them and you should be hearing those input sources in the second heaphone output once you've done so.

L6P

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Thu, 19 Mar 2009 07:17:28 GMT

Hello

I'm a french musician so i beg your pardon for my bad english.

I read your problem... but I have another one. If you could'nt use 2nd headphone, personnaly I can use no headphone at all.

All works fine except headphone outputs... they are muted and I don't find anything about that in the UX8 control panel !!!!

I tried few headphones but the result remain the same : NO SOUND from headphone outputs !!!

Do you think my UX8 is out of order ?

Thanks to help me

Tiburce

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Wed, 18 Mar 2009 12:02:17 GMT

Hi Line6Miller,

I think this was posted in the wrong thread.

Cheers

Re: How do I configure UX8 to use 2nd headphone out?

support@line6.com — Tue, 17 Mar 2009 17:49:38 GMT

Hi,

Here's the document you want to look at. Try the calibration one more time and see if it works.

http://line6.com/community/docs/DOC-4501

Line6Miller

Please be sure to award Helpful and Correct points to community members who respond with helpful or correct answers!