Community: Message List - Vyzex Pocket POD starts up but shuts down immediately.

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Wed, 14 Sep 2011 07:21:46 GMT

Vorp,

Read down to the bottom of this thread. There's your answer. There is no patch anymore - v1.17 of the editor includes the fix that the old version needed as a patch.

Next, your issue is entirely to do with your USB port hardware. Read my 'correct answer' post from a few years back for advice on what to do to deal with it.

Cheers,

Tony

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Wed, 14 Sep 2011 06:54:15 GMT

CAN YOU SEND ME THE PATCH FILE I HAVE THE SAME REBOOTING PROBLEM...Thank you Tony !!!

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Fri, 17 Dec 2010 03:14:50 GMT

Hi Echo,

All the answers to the problem are already posted here - IF your problem is the PocketPOD hardware turning on and off again. Is your problem that the Vyzex editor software is shutting down unexpectedly when you run it?

If the software is closing unexpectedly, please let us know what operating system you are running and if the PocketPOD is running properly when this happens.

Tony

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Fri, 17 Dec 2010 01:27:49 GMT

hello !

i got the same problem, the vyzex pocket pod starts up but shuts down !

i need help please !

thanks

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Sat, 28 Aug 2010 23:24:07 GMT

Your problem is not a bug in Vyzex Pocket POD. Your PC's USB connection is intermittent which is why your PocketPOD shuts down. Your options are:

1. Use a different USB port.

2. Try a better quality USB cable.

3. Connect a powered USB hub between your PC and PocketPOD.

4. Install a USB port expander card on your PC and use these new USB ports with PocketPOD.

If you don't have access to any of these hardware fixes, try your PocketPOD and the Vyzex software on a different computer to see if the problem persists. If it does it could be a problem with your PocketPOD USB port.

Vyzex PocketPOD 1.17 has been in service for years on tens of thousands of computers, each connected to a PocketPOD. It has never been known to cause a PocketPOD to reboot.

Once again to anyone reading this thread - The issue that this thread is named for 'Vyzex Pocket POD starts up but shuts down immediately' has been fixed over two years ago. There is no patch required or available for v1.17. If you have connection problems with your PocketPOD it is either a USB port hardware or MIDI Driver level problem. If your PocketPOD reboots at any point, it is DEFINITELY a hardware problem: 99% of the time it's the USB port on the computer that is to blame, but 1% of the time it turns out to be a hardware problem on the PocketPOD.

-Tony

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Sat, 28 Aug 2010 22:14:42 GMT

I'm use Vizex 1.17 and when i sincronous the pocket POD and finish it, my POD reboot or shut down immediately. Then i don't set any preset in pocket pod by this bug.

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Fri, 27 Aug 2010 22:27:29 GMT

Hi Genas,

As my last post to this thread (right before your three repeated requests) says: The latest version of the program includes the patch. Are you using version 1.07 of the program? It includes the fix contained in the old patch for the earlier version.

What is your specific problem if you are running v1.07? Can you please explain any error messages you get?

Thanks.

Tony

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Fri, 27 Aug 2010 20:32:47 GMT

I have the same problem.

Can you send me the patch, please?.

Thanks.

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Fri, 27 Aug 2010 20:31:37 GMT

I have the same problem.

Can you send me the patch?.

Thanks.

Re: Vyzex Pocket POD starts up but shuts down immediately.

support@line6.com — Sun, 15 Aug 2010 13:34:20 GMT

I have the same problem.

Can you send me the patch?.

Thanks.