Community: Message List - Pod HD500 Looper Playback Volume problem

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Thu, 24 Jan 2013 15:17:13 GMT

I think you guys using the looper could find this diuscussion of mine helpful:

the Looper could attenuate the recorded signal by 6dB! ...

bye

Lore

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Sat, 21 Apr 2012 02:01:05 GMT

The overdub parameter works differently than described in the manual too. It works the same way it does on the M-series.

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Sat, 21 Apr 2012 01:11:13 GMT

The controls in the Looper block seem to work differently than I expect:

- Hi Cut and Lo Cut turned up seem to add more highs and lows.

- Playback increased reduces the playback volume.

Check it out by recording a loop and then mess around with the controls. You'll find the looper settings in the tone patches versus in the looper mode or at least that's how I got to them.

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Sun, 26 Jun 2011 09:24:48 GMT

It seems I solved the problem for my situation.

Turns out the Hi cut and Low cut settings on the lopper are defaulted at 100%.

After turning them to 0% I got all the volume back!

So that's my shortcomming for not understanding those parameters but the default settings are kind of absurd IMHO.

Anyway, I hope this will help your situation as well

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Sun, 26 Jun 2011 06:02:50 GMT

I have the exact same issue. Looper is at the end. Interesting, last night, the first loop volume was fine, but the second and third were barely audible!

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Fri, 24 Jun 2011 20:17:52 GMT

That's strange indeed. It doesn;t seem right that this behaviour is different for some people.

I would really lik Line6 to give us some answers here. Wahat can be the problem and how do we solve it?

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Fri, 24 Jun 2011 20:02:14 GMT

Strange, mine is actually louder

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Fri, 24 Jun 2011 16:19:28 GMT

Does anyone have an answer to this yet?

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Sat, 11 Jun 2011 19:32:16 GMT

I'm having the same problem. Doesn't seem to make any big difference where the looper is.

I have the playback and overdub volume on 100% but the playback signal is still really low.

What can be the reason for this?

Re: Pod HD500 Looper Playback Volume problem

support@line6.com — Sun, 13 Mar 2011 08:39:47 GMT

Whereabouts is your Looper in your signal chain - PRE or POST?