Community: Message List - No Display on M9 and the each unit will not disengage...Going crazy

Re: RE: No Display on M9 and the each unit will not disengage...Going crazy

support@line6.com — Fri, 20 Jul 2012 17:56:33 GMT

I'm having the same issue. Sometimes when I plug it in (always with the Line 6 adapter that came with the M9) the screen lights up with no display...sometimes nothing. I tried a firmware reinstall but all that accomplished is what seems like a factory reset. I have not had good luck taking modern electronics to my local Line 6 dealer...they seem to prefer to work on old amps and guitars rather than compact electronics. Can I send the unit in to Line 6?

RE: No Display on M9 and the each unit will not disengage...Going crazy

support@line6.com — Wed, 05 Oct 2011 21:45:09 GMT

Hey damonk19,

Have you made sure to power it on with the supplied Line 6 Power supply? To reference the power supply that should be used with the M9 follow the link below:

https://www.globalfulfillment.net/gfsnet/%28S%28jk2ans45vgdhjy55wwnkg5iz%29%29/line6/10Expand.aspx?ProductCode=98%20PX2%20US

If are using this power supply and still having this problem, I would suggest that you have a local Line 6 Service Center assess the M9 for you. To locate a Line 6 Service Center in your area, follow the link below:

http://line6.com/service_centers/

No Display on M9 and the each unit will not disengage...Going crazy

support@line6.com — Fri, 30 Sep 2011 17:41:27 GMT

Assistance needed!!!! My M9 has worked for about 10 months and now the display is out and the effects change everytime i hit the A or B unit. The effects will not disengage as well. I can't do a factory reset because no display...

Help!!!

Thanks,

Blake