Re: How to call up a preset on HD Pro using the new Enhanced Midi Control?

support@line6.com — Mon, 21 Nov 2011 03:35:08 GMT

I found this in the appendix C of the Advanced Users Guide, but it's not clear to me... It looks like one would need to call up both the setlist and the preset at the same time? not so sure how to go about doing that....

Bank & Program Change Messages

POD HD Pro will respond to incoming MIDI Bank & Program Change messages as follows.

Load Set List: from your MIDI controller device, send a Bank Change CC0 (Bank MSB), CC32 (LSB) message with a value of 0 (for Setlist 1), 1 (for Setlist 2), etc., followed by a Program Change message (Value 0-63 for Preset 01A - 16D) for the desired Preset within the Set List. The Set List and Preset are loaded on POD HD Pro.

Load a Preset within the current Set List: Send a Program Change message (Value 0-63 for Preset 01A - 16D) for the desired Preset within the current Set List.

I wonder if they could come up with a table just like this one from Pod XT Pro's Manual.. Can anyone post an example just like appendix B from the Pod XT Pro?

http://i44.tinypic.com/oapy54.jpg

How to call up a preset on HD Pro using the new Enhanced Midi Control?

support@line6.com — Mon, 21 Nov 2011 00:17:37 GMT

How can I setup an external foot controller such as Liquid Foot (not FBV footswitch) to call up presets?

When I used the Pod XT Pro, on the back of the manual there was a list of Midi program changes list and it was very easy to call up:

Pod Channel - Midi Program Changes

1A 0

1B 1

1C 2

1D 3

2A 4

2B 5

2C 6

2D 7

etc.. etc..

etc... etc..

Now with the HD Pro setlist implementation, I'm not sure how it would work out as there will be 8 x 1A, 2A, 3A etc... within 8 different setlists...

In the Midi Assign section on the Pod HD Pro Edit, how would one setup in a way that the preset is controlled by an external controller other than the FBV Footswitch?

http://i44.tinypic.com/2585x20.jpg

Community: Message List - How to call up a preset on HD Pro using the new Enhanced Midi Control?

Re: How to call up a preset on HD Pro using the new Enhanced Midi Control?

How to call up a preset on HD Pro using the new Enhanced Midi Control?