Community: Message List - How can I get back my preset tone workable in PODx3 live?

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Fri, 13 Jan 2012 13:33:35 GMT

Thnks ALL ..Problem Solved :-

This is very normal Problem ..Most of user facing it So Why Line6 Dnt give us the

materials I Mean Optical sensor ? WHy they told send it line6 reapire centre ?

I Never Use Line6 next time & I Never tell anyone purchase line6 product

Becuse Line6 dnt take customer care

angry user

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Fri, 09 Dec 2011 18:39:29 GMT

If you have a backup of your presets (use Monkey's "Backup and Restore" option to create a bundled .zip of all the patches currently on your unit), I'd say do another re-flash of the X3 Live but this time, answer "No to keeping existing patches". In other words, do a true factory reset and let Monkey put the newest factory default patches into your unit and re-test the audio output behavior of the unit.

There could've been a problem with a previous patch you had in the unit or perhaps the flash process.

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Tue, 06 Dec 2011 07:49:45 GMT

no sound .. recently i found that if i press wah pedal that means if wah on then im getting sound form every tone but if wah off then soundless ... what can i do ????

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Tue, 06 Dec 2011 04:04:37 GMT

Try using your X3 headphones output - do you hear sound there? This is important troubleshooting information - please try it.

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Mon, 05 Dec 2011 12:12:14 GMT

yes i m using guitar amp ....please healp me

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Sun, 04 Dec 2011 20:50:37 GMT

How are you monitoring your sound? Try using headphones first - is there any sound there? Are you using speakers or a guitar amp for the sound output?

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Sun, 04 Dec 2011 18:51:03 GMT

cheaked and it showing Tone 1 Guitar +vx 1 / Tone 2 same is there any problem ? i cant get any sound here :-?

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Sun, 04 Dec 2011 18:36:54 GMT

Press the Inputs button on the X3. This is where you assign your input sources for Tone 1 and Tone 2. You set it to Guitar if you are using a guitar, to MIC if you are using a mic, etc. When you check the inputs on a factory preset, if it says MIC then the preset is designed to be used with a microphone input. You will not hear your guitar.

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Sun, 04 Dec 2011 18:33:22 GMT

im new user so i dont know how can i check please healp me

Re: How can I get back my preset tone workable in PODx3 live?

support@line6.com — Sun, 04 Dec 2011 17:54:31 GMT

Check your inputs on the presets that are silent. Some presets are designed to use the Microphone input - not guitar. They are designed for vocals or for mic'ing an acoustic guitar.