Community: Message List - Line6 POD X3 Live

Re: Line6 POD X3 Live

support@line6.com — Mon, 12 Dec 2011 23:21:41 GMT

Its basically a printer usb cable. If you got a printer laying around, just use that!

Re: Line6 POD X3 Live

support@line6.com — Mon, 12 Dec 2011 20:53:32 GMT

Thank you Silverhead. I hadnt seen that USB connection before, so I thought it was a specialist connector. I will pick one up tomorrow! Cheers for the quick response!

Re: Line6 POD X3 Live

support@line6.com — Mon, 12 Dec 2011 20:25:32 GMT

The USB cable is standard. If you don't have an extra lying around just pick one up at your local electronics store.

For recording you can use the X3 and its usb connection as the audio interface, or you can use the X3 normal outputs as input to a seperate audio interface. Your choice. The X3 is a very good quality soundcard and using it as the audio device, with its ASIO driver over usb, gives you lots of recording options that the normal outputs don't. You can record the setero mix of both Tone 1 and 2, or just Tone 1, or just Tone 2, or the Dry signal of either Tone.

Line6 POD X3 Live

support@line6.com — Mon, 12 Dec 2011 19:59:54 GMT

Hey. Just purchased a Line6 POD X3 Live from a friend of mine, its missing the USB cable adapter for it to connect to PC/Laptop, where can I purchase a new cable? Do I need the USB adapter to record onto the PC/Laptop or use the software and use normal 1/4 jacks etc?

Thank you in advance

Wayne \m/