Community: Message List - POD HD flash update failed!

Re: POD HD flash update failed!

support@line6.com — Thu, 05 Apr 2012 23:15:12 GMT

There has since been a couple of software releases which should have addressed this problem. Please let us know if the problem persists.

Regards,

Line6Hugo

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 23:35:08 GMT

hello, I have problem with my POD HD500. I use latest working version of L6 monkey(1.43?), and a 1.22 firmware on my POD. Whenever I update unit, instalation can't be done(code 80007104). Cables, connections and drivers are OK, because I can record with my DAW and HD500, only newest firmware does not work. what's happening?

Thanks

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 22:50:03 GMT

I think you're probably right, and unfortunately I am not familiar with Mac. I have seen some threads here about how to uninstall things on a Mac - maybe you can search for them and interpret which ones are helpful. Other Mac users may be able to jump in here too.

Good luck - I'm sure it will get resolved soon. Line 6 Tech Support will be back online tomorrow, California time (pending Super Bowl aftermath parties..... )

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 22:22:09 GMT

I'm running OSX Lion, 10.7.2. Is there an installer for Mac? BTW, I used timemachine and restored an older version (1.40) of Monkey, ran the update to 1.43 from that, no go. Also updated the drivers, the install app runs, says complete, sucessful, still not drivers installed when I run Monkey. Seems the installation/update process in Monkey is not functioning at all, on anything. HAS to be something with some existing files on my Mac, which need to be cleaned out. Thoughts?

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 22:00:49 GMT

Tried that, the Updates still shows 1.50 is installed, and 1.43 is the latest. Tried it a few times. Initially, I just downloaded the 1.43 from the web site. Same issue either way, it loads 1.50, not 1.43. And of course, still have a corrupt flash file on the Pod...

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 21:42:07 GMT

Did you use the Line Unistaller to uninstall Monkey? You will find it in the Tools subfolder of the Line 6 folder in your All Programs selection from the START Menu.

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 21:39:23 GMT

Yep, that's all good. I just can't get Monkey 1.43 installed for some reason. I removed 1.50, and can't get 1.43 installed. The install program reports the installation was successful, but only takes .5 seconds, and certainly there is no Line 6 Monkey app on my drive.

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 17:57:41 GMT

When you run Line 6 Monkey right now it should actually show you that the lasteset version is 1.43 (Line 6 seems to have reset its database to take the buggy v1.5 out of circulation). So if you select Line 6 Monkey in the Updates list and choose Reinstall Latest it may work.

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 17:31:30 GMT

Any thoughts on how to install 1.43? I've tried it several times, it says its installed, but no, not really. The install doesn't do ****. I've deleted 1.50, done it again, it doesn't seem to do anything.

Re: POD HD flash update failed!

support@line6.com — Sun, 05 Feb 2012 17:09:28 GMT

Are you starting it in safe mode as described above?