Community: Message List - Did 2.02 change the overall EQ?

Re: Did 2.02 change the overall EQ?

support@line6.com — Sat, 21 Apr 2012 11:13:13 GMT

If the reset worked then your patch will default back to 1A on the first setlist (default: 'of Plexi').

Also the setlist names will be reset to default (if you changed them previously).

Re: Did 2.02 change the overall EQ?

support@line6.com — Fri, 20 Apr 2012 21:46:50 GMT

Thanks!

Did a reset (at least i think so; is there no success-message in the display?!) and recalibrated the pedal. Patch names are still there . . sounds like always on my home setup. Tomorrow i'll return to our rehearsal room.

Re: Did 2.02 change the overall EQ?

support@line6.com — Fri, 20 Apr 2012 12:23:03 GMT

You should try it back in Mono again before you change anything and see if you hear a tonal difference.

Otherwise, Did you do a Global Settings Reset after you updated the firmware? It is well worth it ... a couple of people have reported significant loss in tone after a flash and this has helped.

Details here - you will not lose your presets but you will lose your setlist names. Back your patches up first if you are nervous.

---> http://line6.com/support/docs/DOC-2222

Re: Did 2.02 change the overall EQ?

support@line6.com — Fri, 20 Apr 2012 09:24:04 GMT

Just a short resume of what was different on yesterday's rehearsal:

Firmware from 1.4 to 2.02

Connected the HD with two 1/4" cables in Stereo (channels panned L (9) R (3)

Connected a 2nd pedal

Any ideas?

Did 2.02 change the overall EQ?

support@line6.com — Fri, 20 Apr 2012 07:46:34 GMT

Hi all! Yesterday we rehearsed the first time after the update to 2.02. I plugged the HD500 in, not mono, as usual, but stereo with two 1/4" plugs. The sound was terrible . . !!!

First i did'nt know what to do, but then i decided to tweak the eq on the console, which i normally set flat and don't touch. After some more tweaking my patches, changing cabs and some eq it worked ok, but i still was'nt happy with the situation.

The HD is set to Studio/Direct, my actual channel Setting is: Treble 9 'o clock, Mid 3 'o clock and Bass 11 'o clock . . :-(

What are your experiences? How do you set the channel eq?