Community: Message List - Volume issue POD HD 500

Re: Volume issue POD HD 500

support@line6.com — Sun, 27 May 2012 07:11:26 GMT

Also, try flipping the 1/4" Output level to line and then turning volumes down if things are too loud. This may increase noise in some cases but gives you lots more headroom to play with.

Re: Volume issue POD HD 500

support@line6.com — Sat, 26 May 2012 23:23:44 GMT

Have you tried boosting the output using the Mixer in the HD500? A volume pedal in one of the FX positions?

Volume issue POD HD 500

support@line6.com — Sat, 26 May 2012 23:13:11 GMT

Hi everybody,

I picked up my HD500 a few days ago, and I can´t figure out what´s the problem with the volume... I plug it into a Fender Blues Junior III amp, I use the "Combo Front" Output Mode on the HD 500.

The volume of the amp connecting the guitar straight into it is much higher than the volume with the HD connected, despite the Master is at 100%... Obviously this happens with a "blank" patch, no amp, no effects, nothing.

I´m trying to configure some patches with no amp modelling and I MUST put a compressor to reach to a decent volume, this can´t be OK...

Any help?

Thanks and cheers!