Community: Message List - POD HD 500 unexisting ON/OFF switch

Re: POD HD 500 unexisting ON/OFF switch

support@line6.com — Tue, 19 Feb 2013 09:13:29 GMT

I can see why there isn't one on the unit.

Those are great ideas for an on/off switch on the PSU

Re: POD HD 500 unexisting ON/OFF switch

support@line6.com — Thu, 14 Feb 2013 23:47:07 GMT

Check out this idea i made for my HD500 to protect all the connectors and make it easy to turn on and off.

http://line6.com/support/message/410751#410751

Re: POD HD 500 unexisting ON/OFF switch

support@line6.com — Sun, 03 Jun 2012 05:03:11 GMT

How about this 0.39 electrical on/off switch that I use for my POD HD500?

Re: POD HD 500 unexisting ON/OFF switch

support@line6.com — Sun, 03 Jun 2012 01:07:57 GMT

Thanks silverhead! Good advice!

Re: POD HD 500 unexisting ON/OFF switch

support@line6.com — Sun, 03 Jun 2012 01:04:28 GMT

No there's not. But there are different ways to turn the power on/off. I use a surge-protected power bar with an on/off switch. My HD500 is connected to the power bar, as is my PA system and mixer, with a copule of spaces left for any other gear I might connect from time to time. Everything goes on/off at once using the power bar switch, protecting the fragile power connector on the HD500.

POD HD 500 unexisting ON/OFF switch

support@line6.com — Sun, 03 Jun 2012 00:49:48 GMT

Hi there,

Is there a way to turn on/off the POD HD 500 without plugging/unplugging the AC Power?

Thanks!