Community: Message List - Whenever I turn to Tone 2, its absolutely silent

Re: Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Thu, 26 Jul 2012 13:43:58 GMT

THANK YOU SO MUCH!!!!

Re: Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Thu, 26 Jul 2012 01:30:30 GMT

Check your Output settings - you may have Tone 2 set to MUTE.

Re: Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Wed, 25 Jul 2012 23:22:16 GMT

The input jack is physically plugged, I can switch from Tone 1 and Tone 2 easily. Its just that there's no signal at all for the Tone 2.

I currently have these Inputs:

Guitar
Input 1

Guitar
Input 2

Re: Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Wed, 25 Jul 2012 02:38:52 GMT

Check your Input setting for Tone 2 - make sure the Input points to the physical jack that you are plugging your guitar (or other desired signal source) into.

Re: Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Wed, 25 Jul 2012 02:32:21 GMT

I unlocked it and still no signal.

Re: Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Wed, 25 Jul 2012 02:13:17 GMT

You probably have Tone 2 locked. On the Home page you will see a padlock icon in the bottom row of the display. Turn the little knob beneath it until the padlock icon is in the unlockjed position.

Whenever I turn to Tone 2, its absolutely silent

support@line6.com — Wed, 25 Jul 2012 01:39:55 GMT

I have a POD X3 Live and I've been trying to have the "blended" sound but because whenever I change to the Tone 2, there's no signal and absolutely silent. Please help!