Re: Recording Help

support@line6.com — Tue, 14 Aug 2012 14:12:27 GMT

Sorry folks, it was a dead cable!!

Recording Help

support@line6.com — Tue, 14 Aug 2012 13:45:03 GMT

Hi,

I have a mixer connected to the line inputs on the back of the UX2. The mixer has 2 instrument and mic inputs that can be recorded by selecting line 1 & 2 in gearbox and they record in stereo. However, I have my microkorg connected the left and right line inputs on my mixer and I cannot record by selecting line 1 & 2 in gearbox, I need to change it to line 2 only and the volume on my mixer shows that only one channel has volume, even though it plays back through both channels. If I connect my microkorg direct to the line inputs in the back of the toneport instead of the mixer, I can record once again by selecting line 1 & 2 in gearbox.

Therefore, I'd like to know if there is a reason why this happens as it means I cannot use the mixer to play guitar and microkorg at the same time.

Any help would be most appreciated!

cheers

craig

Community: Message List - Recording Help

Re: Recording Help

Recording Help