Community: Message List - Spider Valve 212 Firmware update with Midi.

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Wed, 24 Oct 2012 21:11:03 GMT

Well new lead turned up today and it worked first time.

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 20:26:16 GMT

Thanks for your help but tried all that. As for the driver can't realy find it on line windows just update it on it's own. It was a cheap cable of ebay.

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 20:11:11 GMT

P.S. I was using Windows Vista

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 20:09:58 GMT

Hmmmmm...and you downloaded the driver for each USB port ya tried? I also switched the in/out midi cables on my DT50 'cus thier markings were kind of confusing. Just for ***** and giggles, try that.

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 18:37:43 GMT

They were all laptops if that helps

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 18:18:39 GMT

Thanks for the help but I had treid it in all usb slots on two different computers one is windows 7 the other is XP.

Re: Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 17:45:50 GMT

I was getting the same thing with my DT50. All I did was use a different USB port on my laptop and it worked.

Spider Valve 212 Firmware update with Midi.

support@line6.com — Sat, 20 Oct 2012 17:19:47 GMT

Hi I'm trying to update the Firmware on my Spider Valve 212 from 1.17 to 2.0 using line 6 monkey and Midi to Usb Cable (bought the wrong FBV).

Followed all the tips and instructions line 6 monkey finds the amp when I start updating firmware it starts even the front panel changes to" ready to update", but everytime it just stops half way through and come's up with a Midi error (code 80000002) invalid parameter. I have checked and re checked cables and and no luck even tried it on a different computer and still the same I have reset the amp to factory settings my switching on the amp and holdind down A. So I'm at a lost any help would be creatful.

Many Thanks Daniel.