Community: Message List - FLEXTONE II HD..... HOW TO CONNECT to a 4x12 ?!?!?!

Re: FLEXTONE II HD..... HOW TO CONNECT to a 4x12 ?!?!?!

support@line6.com — Fri, 16 Nov 2012 20:41:33 GMT

many thanks for your answer....

i will try next week the 2 cables method....

i have set the switch to mono on my cab.... but i have listened only 2x12 speaker.... trying to plug the cable in the other input on the cab.... only 2x12 again...

i have heard 4x12 only one time but i was scared i made something wrong... i dont know... i will try again soon..

do you think is possible that i ruined something in the power amp section changing ohm switch and cables inputs with the head turned on?

i have another issues with this jewel head.... on my floorboard appears "E" as edit mode... but i havent edit anything....dont know why....

somebody have the same problem? how can i fix it?

Re: FLEXTONE II HD..... HOW TO CONNECT to a 4x12 ?!?!?!

support@line6.com — Thu, 15 Nov 2012 21:47:09 GMT

Looks right to me, but I can't really see your mono/stereo switch position in pic 3 - is it switched to the left (mono) side? Did you try changing to the other jack on the speaker cab?

I have a similar setup, but using a FlexIII that's been converted to a head. I don't have a mono output that's full power - I have to use the left output, which means that I'm only putting out 60 watts. For that reason, I use two cables from the left/right outputs to the speaker cab, which splits the speaker pairs into right/left. That way, I get full power and stereo.

If your switch is set correctly, I'd try another cable from your right output to the other speaker input to see if it handles the job. Perhaps something is funny with your speaker wiring.

Good luck

FLEXTONE II HD..... HOW TO CONNECT to a 4x12 ?!?!?!

support@line6.com — Thu, 15 Nov 2012 20:15:32 GMT

hi there people... i love line 6 machine's.... i had pod bean,pod xt live, i have pod hd500... pod pro 2.0 and a FLEXTONE 2 head.....

im going slightly mad... how can i connect this head to a 4x12 cab?!?!?!?

if i put the mono output in the mono input of my cab..... i can hear only 2x12.... the other 2x12 stay mute....

i need 2 power cables in order to listen all the 4x12?????

there is something wrong in my head??? (flextone head )

else let me know how to connect.... look at my pics....

maybe i put the power cable on the wrong input of the cab?!? (look the last pic)

let me know something please...