http://line6.com/support/community/support/pod_support/pod_x3_?view=discussions Most recent forum messages en Sun, 18 Nov 2012 05:48:59 GMT Jive SBS 4.5.7.0 (http://jivesoftware.com/products/clearspace/) 2012-11-18T05:48:59Z en http://line6.com/support/message/400099?tstart=0#400099 <!-- [DocumentBodyStart:406143a2-89d3-45a7-97b7-07515b204cdc] --><div class="jive-rendered-content"><p>I've been using an X3L direct to PA for a while at church and I've always wrestled with this one thing...<br/>Our console does not have a pad switch on the channels, and if I use the "fixed" output, its way too hot going to the console and causes clipping.<br/>I occasionally play other places and sometimes plug into other PA systems. Sometimes they have a pad, and sometimes they dont.<br/>I typically just leave the master volume at 1/2 and that gets about where I need to be. I usually keep it there, but sometimes I come home and practice with headphones, or it gets bumped packing up and I dont realize it until the start of the next service where my level is off considerably. I would prefer to use the fixed output, but have to have a way to provide my own pad.</p><p style="min-height: 8pt; height: 8pt; padding: 0px;">&#160;</p><p>I have seen inline XLR pads in the past, and was wondering if anyone here has experience with them.<br/>I would want one that is like a short cable, not the "barrel" style...<br/>How would this impact the tone?<br/>Any recomendations of a specific product?</p></div><!-- [DocumentBodyEnd:406143a2-89d3-45a7-97b7-07515b204cdc] --> Sun, 18 Nov 2012 05:48:59 GMT support@line6.com http://line6.com/support/message/400099?tstart=0#400099 2012-11-18T05:48:59Z 6 months, 6 days ago 0