Community: Message List - POD Farm 2 won't acknowlege licence

Re: POD Farm 2 won't acknowlege licence

support@line6.com — Tue, 20 Nov 2012 04:38:03 GMT

found some things some line6 people said - might help (you might have seen them - forgive me if you have):

http://line6.com/support/message/379122 (up the page a bit - Line6Don)

http://line6.com/support/message/362153

I saw some other people with similar problems and updating the drivers seemed to help.

Hope you get things working soon,

God Bless,

David

Re: POD Farm 2 won't acknowlege licence

support@line6.com — Tue, 20 Nov 2012 04:32:27 GMT

Hi,

Might need to (if you haven't already) contact technical support for this one. Top right of page - support -contact technical support - contact technical support. Hopefuly they can help.

I'll have a look around and see if I can see anything too.

God Bless,

David

POD Farm 2 won't acknowlege licence

support@line6.com — Mon, 19 Nov 2012 11:51:13 GMT

Right so here is the issue uppon starting POD Farm 2.55 i recieve the "POD Farm failed to initialize L6Twxy Framework. (Code 0x8000e00a)" error message, now i can get around this by starting without my UX1 plugged in this however poses another issue in that without the UX1 connected it will not read the licence.

the concept behind such a system is completely baffling as i am getting very close to the point of returning my newly purchased hardware as quite clearly it is faulty (even if the fault is entirely down to the software) i would very much apreciate a prompt response as currently i and extremly disappointed with my line 6 experience so far.