Community: Message List - USB does not work - HD300

Re: USB does not work - HD300

support@line6.com — Mon, 26 Nov 2012 20:19:07 GMT

Something like this. But from me one of the 4 bares is fractured I guess so USB cable can't make a solid connection to the port on the POD exactly what you said.

Re: USB does not work - HD300

support@line6.com — Mon, 26 Nov 2012 19:12:41 GMT

Kind of sounds like what happened to another guy here - his USB port had the contact pads in place, but did not have the actual plastic bit that holds it all together, Basically just 4 bare contact pads sticking out of the POD.

If thats what you have going, then it is likely that the USB cable cant make a solid connection to the port on the POD.

Re: USB does not work - HD300

support@line6.com — Mon, 26 Nov 2012 19:07:58 GMT

huh.. I've always known that my English is bad.. xD My USB port is broken I guess.. When I connect it to my computer it just doesn't work.. I can't hear any sound from computer, and HD300 Edit can't find my POD.. What should I to do?

Re: USB does not work - HD300

support@line6.com — Mon, 26 Nov 2012 02:11:43 GMT

what exactly is bent?

To make a long story short, there is nothing that should be able to bend, which means whatever is bending is broken or faulty somehow.

USB does not work - HD300

support@line6.com — Sun, 25 Nov 2012 13:38:58 GMT

Hey. Recently I was playing with backing from computer via USB. I went to bed, and the morrow USB didn't work.. I connect cable to computer, and nothing happens.. I tried with another cable, and the same. I observed, that one of four wires was bent. So I squared it, and unfortunately without good result. Still the same problem. What do I have to do? Thanks in advanced for help.