Community: Message List - Tap Tempo not sending from HD500 Editor to POD

Re: Tap Tempo not sending from HD500 Editor to POD

support@line6.com — Wed, 12 Dec 2012 00:25:49 GMT

No very preciousgeorge, I have already checked this. It works neither with global, nor with preset. It's a bug.

Re: Tap Tempo not sending from HD500 Editor to POD

support@line6.com — Tue, 11 Dec 2012 23:39:11 GMT

99% it's a bug....An annoying one!!

Re: Tap Tempo not sending from HD500 Editor to POD

support@line6.com — Mon, 10 Dec 2012 04:23:12 GMT

In Setup, page 6, Tempo options, TEMPO sync Global or preset may come into play. I get a bit confused on this too. Hopefully someone can assist.

Re: Tap Tempo not sending from HD500 Editor to POD

support@line6.com — Sun, 02 Dec 2012 07:33:53 GMT

I 've checked what you say.

If I dial in the tap tempo via my HD500 fw2.10 directly, it'll change the value on the editor immediately.

But if I use the editor for dialing in the tap tempo, no matter if I do it by entering the number or by tapping with the mouse, it mostly doesn't send the value.

Sometimes after I've changed the tap tempo on the editor, then swaped to another patch on my HD500 and returned to the old patch, it would work, but only sometimes.

This seems like a bug to me.

Tap Tempo not sending from HD500 Editor to POD

support@line6.com — Sun, 02 Dec 2012 04:10:27 GMT

If I set the Tap Tempo on the Editor, then send the preset, the editor flashes at the new speed but the HD500 does not accept the new value. I can toggle any other button via the editor, but the tap tempo will not send. If I receive the existing preset from the HD500, the old tempo is still in place. If I dial the tempo in via the HD500 directly, it'll change on the Editor. Is this a bug? Or am I doing something wrong?

Using an HD500 / HD500 Edit / Variax 300 rig, HD500 firmware updated to latest (v2.10).