Community: Message List - V1.1 - Where is the new feature list with a description?

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Wed, 30 Jan 2013 17:52:41 GMT

Yes I had to create a specific folder for the backup file otherwise it does not work if I want to save the backup file to the root of the SD card.

So I applied the update (fingers crossed!) and restored my backup file and all seems to be like before in my setup. The Record utility is far better and all my recordings work now.

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Wed, 30 Jan 2013 17:21:06 GMT

Hello,

I just successfully backed up my setups and scenes on a version 1.00 StageScape and restored them on a v 1.10 StageScape. The way I made sure that this was the backup of my most current setups and scenes was create a new folder just for this backup. When you tap on "Backup Presets", tap on "Choose Location" and create a new folder. I named my folder "Backup13012". You can also rename the backup file. The .bin file is then saved in that folder as the only file in that folder. You can then remove the SD card and reinsert it in the StageScape when you want to restore your setups and scenes.

Creating a new folder with just those backups in it will be the best way to reassure that .bin file has the newest backup. Other than that, you will have to trust that file is good. I have not seen one of these files fail yet.

Jon

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Wed, 30 Jan 2013 08:48:44 GMT

I did that but there's no backup file on my SD card after I save it... My SD card only contains a BackupFile.bin that has no date so I don't know when it was saved. Now when I create another backup file by giving it a new name (as you said above) that new file cannot be found on my card.

What's wrong? I cannot update the mixer without being sure I have the right backup file because I don't want to lose hours of work...

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 19:19:51 GMT

You can name file in the "Backup Presets" dialog. If you name it "Backup 1-29-2013" you can tell it apart from other backups.

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 18:59:39 GMT

I didn't make the trip this time. It's crisis here in Holland aswell :-) And our Queen is stepping down...

Will you make it out to Messe, I plan to go there..

cheers

- Hans

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 18:28:52 GMT

Hans ... how did I miss you in Anaheim???

Next time I guess!

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 18:22:10 GMT

Yes that's what I see but how to be sure it's the right file? There's no date associated to it.

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 18:15:02 GMT

In system settings -> Backup -> Restore From Backup you will see the file "BackupFile.Bin"

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 18:04:14 GMT

Before updating I want to backup my setup to the SD card. I do it but receive no notification saying "your setup is saved" or "a backup already exists with the same name"... Is that normal? How to be sure I will be able to restore my setup after the update? I want to be sure about that...

Re: V1.1 - Where is the new feature list with a description?

support@line6.com — Tue, 29 Jan 2013 16:47:12 GMT

Thanks Mr. Boomer, I just updated, Update itself went fine. Just tried the new Multitrack rec. It took the old setups, and the marker system works as a charm already... Now where's that new Guide...

cheers

- Hans