Community: Message List - Some patches - no sound

Re: Some patches - no sound

support@line6.com — Wed, 06 Feb 2013 16:50:06 GMT

Thanks guys, I'll try the inputs

Re: Some patches - no sound

support@line6.com — Wed, 06 Feb 2013 15:13:39 GMT

Check the inputs selected in the POD. 9 times out of 10 when I have that issue with a patch the input was set to something other than what my guitar was plugged into.

Re: Some patches - no sound

support@line6.com — Mon, 04 Feb 2013 10:23:06 GMT

Hi,

check the effects of these patches. If there's an Volume Pedal in the Effect routing try to deactivate it or move the Pedal on the POD Up and down.

Re: Some patches - no sound

support@line6.com — Sat, 02 Feb 2013 13:02:03 GMT

If you are using older Variax, set inputs to Variax (or Variax and Same), if you are using new JTV, set inputs to Variax (modeled sound) or Variax Mag (classic pickups). Both applies if use VDI cable to connect Variax (or JTV) with POD. If some patches still don't work, check if expression pedal isn't set to "mute" sound when in max position or vice versa...

Message was edited by: Jan Kupsa

Re: Some patches - no sound

support@line6.com — Sat, 02 Feb 2013 12:34:37 GMT

I'm using a Variax too. What should I set them to? That did confuse me a bit

Re: Some patches - no sound

support@line6.com — Sat, 02 Feb 2013 11:40:08 GMT

Check your inputs. Are they what you're plugging into? I have a Variax and that stumped me for a bit.

Re: Some patches - no sound

support@line6.com — Sat, 02 Feb 2013 09:55:58 GMT

thanks. Can anybody else help?

Re: Some patches - no sound

support@line6.com — Sat, 02 Feb 2013 09:52:30 GMT

The FX loop uses an effects block, the same as anything else, so if you can't see it, it's probably not there. I'm not sure what else your problem could be.

Re: Some patches - no sound

support@line6.com — Fri, 01 Feb 2013 14:17:53 GMT

In the list of effects? I can't see anything that says 'effects loop'?

Re: Some patches - no sound

support@line6.com — Fri, 01 Feb 2013 14:02:38 GMT

Just click the little on/off button, the same as any normal effect block. Or just remove it if you're not using it.